Overview
YIHENG B-1FN multi-purpose testtube Stirrer is a device that can perform strong oscillation and stirring from low speed to high speed, suitable for handling a variety of containers from testtubes to microplates, beakers, etc.
Features
1. Provide two operation modes of touch mode and continuous operation mode.
2. Rotation speed is displayed through LED bar chart, which is convenient to confirm Rotation speed and oscillation strength.
3. After installing the Stirrer base, it can be used as a Stirrer, with a maximum stirring capacity of 2000ml (maximum Rotation speed 1500rpm).
4. Adopt high Rotation speed DC brush motor and microcomputer Rotation speed feedback mode to ensure stable operation.
5. The shell is made of die-cast aluminum alloy, with a strong structure.
Principle
The device is powered by a high Rotation speed DC brushed motor and uses a microcomputer Rotation speed feedback to precisely control the swirl/spin to achieve stable oscillation and stirring from low speed to high speed. The user can set the Rotation speed by sliding and monitor the running status in real time through LED bar graphs.
Applications
Laboratory Sample Handling, Chemical Synthesis Stirring, Biological Foster Shaking, Microplate Mixing, Beaker Solution Stirring
Standards
Power supply voltage in line with AC100~ 240V 50/60Hz international standards
Steps
1. Select the appropriate fitting (e.g. single fitting, flat fitting, tube fitting, microplate base or Stirrer base) according to the processing container and install it.
2. Connect the device to a dedicated AC adapter and power it on.
3. Select the desired Rotation speed (200~ 2500rpm, Stirrer function is 200~ 1500rpm) by sliding setting.
4. Select touch mode or continuous operation mode to start the device.
5. Observe and confirm the current Rotation speed and oscillation state through the LED bar chart.
6. Turn off the power after use and clean the accessories and equipment.
Notice
• Please use the dedicated AC adapter that comes with the device and ensure that the Power supply voltage is within the range of AC100~ 240V.
• When using as a Stirrer, be sure to install a Stirrer base with a Maximum capacity of no more than 2000ml and a maximum Rotation speed of no more than 1500rpm.
• Please select and install the corresponding accessories correctly according to the type of container handled.
• Do not touch the swirl/spin parts when the device is running.
• Be sure to disconnect the power supply before cleaning.
Do not use this equipment in humid or flammable environments.
