Overview
BANTE NH3-UK Ammonia Ion Selective Electrode is a composite Electrode imported from the UK, designed for the measurement of ammonia Ion concentration in aqueous solutions. Measurement range is 0.02 to 17000ppm, suitable for a variety of water quality analysis scenarios.
Features
1. Complex ammonia ion Electrode, no need to use reference Electrode, easy to operate.
2. Solid State Sensor design, can be directly immersed in liquid for measurement.
3. The shell is made of solid epoxy resin, which is not easy to be damaged and has high durability.
Principle
The Electrode operates on the principle of Ion Selective Electrode (ISE). Its Solid State Sensor has a specific Response to ammonia ions in solution, and determines the concentration of ammonia ions in solution by measuring changes in Electrode Potential.
Applications
Water quality analysis, environment monitoring, industrial process control, laboratory research
Steps
1. Connect the Electrode to a compatible ion meter or pH/mV meter via a BNC connector.
2. Counter electrode calibrated using standard solution.
3. Immerse the Electrode in the sample solution to be tested to ensure that the Sensor is fully immersed.
4. Wait for the reading to stabilize and record the measurement results.
5. After the measurement is completed, clean the Electrode with deionized water and store it according to the instructions.
Notice
Please read the instrument manual carefully before use.
• Ensure that Electrode is calibrated as required prior to measurement.
• Avoid collision of Electrode Sensor with hard objects to prevent damage.
• Electrode should be cleaned in time after measurement to prevent sample residue from affecting subsequent Measurement accuracy.
Store the Electrode under the conditions recommended by the manufacturer to extend its service life.
