Overview
BANTE Ag-UK is a British original Silver Ion Selective Electrode, using a composite Electrode design, without the need for additional reference Electrode. Its Solid State Sensor can be directly immersed in liquid for measurement, Measurement range is wide, 0.01~ 107900ppm. Electrode housing is made of strong epoxy resin, which is not easy to break, and is equipped with 1 meter cable and BNC connector.
Features
1. Imported from the UK.
2. Composite Electrode design, no need to use a separate reference Electrode.
3. Using Solid State Sensor, it can be directly immersed in liquid measurement.
4. Epoxy resin shell, sturdy and durable, not easy to break.
5. Measurement range is 0.01~ 107900ppm.
Applications
Water quality analysis, environment monitoring, industrial process control, laboratory research
Standards
The information does not mention
Steps
1. Connect the Electrode to a compatible ion meter or pH/mV meter via a BNC connector.
2. Counter electrode calibrated using standard solution.
3. Immerse the Sensor portion of the Electrode in the sample solution to be tested.
4. Wait for the reading to stabilize and record the measurement result.
5. After the measurement is completed, clean the Electrode with deionized water and store it properly.
Notice
Please read the instrument manual carefully before use.
• When calibrating and measuring, make sure the Electrode Sensor is fully immersed in the solution.
• Electrode film to avoid scratching or contamination.
• Wash with deionized water after use.
Store Electrode as required to extend its service life.
• Ensure that measuring instruments are compatible with Electrode.
