Overview
BENTING CBWS-150B Constant Temperature and Humidity Incubator is a device for thermostatic experiments and environmental testing. Temperature range 0~ 65 ℃ without humidification, 10~ 65 ℃ with humidification, temperature distribution accuracy is +/- 1 ℃, Humidity Control Range is 45%~ 90% RH.
Features
1. Humidity control with independent humidification
2. LCD 30-segment program control, repeated step-by-step, step-by-step operation
3. Convenient operation, fixed value operation, regular operation, automatic stop
4. Dedicated function keys to achieve temperature setting
5. Auxiliary menu, realize over-rise alarm, deviation correction, menu lock
6. Turbine centrifugal forced air supply, more uniform temperature
7. Power-off protection, parameter memory, call recovery
8. Compressor overload protection
9. Start stop, power failure protection, call recovery
10. Circuit self-diagnosis, Sensor fault alarm, upper and lower limit temperature alarm
11. Smart defrosting
12. Monitor timing
13. Overlift preventer
Principle
The device uses forced convection air supply, which is forced by turbine centrifugation to ensure uniform temperature distribution. The temperature control uses a 30-segment LCD program Control mode, which is precisely measured and adjusted by the Pt100 Sensor. Humidity control is achieved automatically through an independent humidification system.
Applications
Thermostatic test, environmental test
Steps
1. Use the dedicated function keys to set the temperature
2. Select the operation mode: fixed-value operation, regular operation or program operation
3. Set Timer Range 0~ 99.9h × 30
4. Start the device running
5. The device can stop automatically or run according to the program
Notice
• Pay attention to the over-rise alarm function
• Use the menu lock function to ensure safe settings
• Pay attention to the working status of the overlift prevention device
• Ensure that the overload protection function is normal
• Pay attention to the power failure protection function
• Check Compressor status before use
• Note the equipment load limit: shelf load 15kg
