Overview
INKS decolorization Wear resistance tester (model: ZB-MC20) is mainly used to test the Abrasion Resistance of the printing ink layer of the printing product, the Abrasion Resistance of the PS version photosensitive layer, and the wear resistance performance of the surface coatings of related products.
Features
1. Test speed is 43 times/min
2. Friction count ascending and descending sequence optional
3. The number of friction can be set between 1 and 999999
4. Automatic shutdown after the test is completed
5. Power outage memory function can be set
6. Compact mechanism, beautiful appearance, easy maintenance
Principle
The testing machine sets the friction load, friction Travel and Friction Frequency to make the friction head reciprocate on the surface of the sample to simulate the actual use of abrasion, and records the number of friction times through the counter to evaluate the wear resistance of the tested material.
Applications
Printing ink layer abrasion resistance testing, PS plate photosensitive layer abrasion resistance testing, product surface coating abrasion resistance testing
Standards
GB/T 7706、GB/T 17497.3
Steps
Connect the power supply (AC 220V +/- 10% 50Hz 2A).
2. Install the sample.
3. Set the friction load according to the test standard (e.g. GB or ASTM).
4. Set the required number of frictions (1 to 999999).
5. Select Friction Frequency (21/43/85/106cpm four-gear adjustable).
6. Start the device and start testing.
7. Automatic shutdown after the test reaches the set number of times.
Notice
• Power supply voltage meets requirements (AC 220V +/- 10% 50Hz).
• Please read the manual carefully before operation, install the sample correctly and set the parameters.
• Do not touch moving parts when the equipment is running.
• Regularly maintain the equipment to ensure its normal operation.
• Note that the setting of friction load should be selected according to specific test standards (e.g. GB or ASTM).
