Overview
FANGZHOU FZ-241-NMR PH Electrode is a professional measurement PH value Electrode with lead-free Glass housing and long life reference design. Its PH Measurement range is 0~ 14pH, Operating temperature range is 0~ 100 ℃, suitable for PH detection in various environments.
Features
1. S-Type Glass Film, Film Impedance Less Than 450MΩ, Response Sensitive.
2. The liquid network part is a ceramic core structure to ensure stable electrolysis liquid exchange.
3. The reference type is a long-life design, using 3M KCL electrolysis solution to extend the service life.
4. Shell material is Lead-free Glass, environmental protection and safety.
5. Electrode size is φ 12-φ 3 * 240mm, connector is BNC/1m, easy to install and connect.
Principle
The PH Electrode is contacted with the solution to be tested through the Glass film, resulting in a potential difference proportional to the pH value of the solution. The internal reference system uses 3M KCL electrolysis solution, which is stabilized through the ceramic core liquid network, to accurately measure the pH value.
Applications
Water quality monitoring, laboratory analysis, industrial process control, environment testing
Standards
Lead-free environmental standards
Steps
1. Connect the Electrode to the measurement device via the BNC connector.
2. Immerse the Electrode in the solution to be tested to ensure complete contact of the Glass film.
3. Wait for the reading to stabilize and record the PH value.
4. Clean Electrodes after use and store them properly.
Notice
• Electrode to avoid severe impact or high temperature environment.
• Regularly check the electrolysis fluid level and replenish if necessary.
• Wash in time after use to prevent contamination or blockage.
• Keep Electrode moist during storage to avoid drying damage.
