Overview
SYATEK 32CHBF1030GH Percent Tube Thickness Gauge is a precision measurement tool with a Measurement range of 0~ 10mm. It is made of aluminum shell material, with a throat depth of 30mm and a lower ball head diameter of 3.5mm for easy in-depth measurement. The product is equipped with LR44 button battery power supply, and the Encasement is a sponge plastic box.
Features
1. Measurement range, covering 0~ 10mm.
2. Measurement accuracy is high, up to ≤ +/- 0.02mm.
3. Graduation fine, 0.01mm.
4. Powered by LR44 button battery, easy to use.
5. The diameter of the lower ball head is 3.5mm and the throat depth is 30mm, which is suitable for in-depth measurement.
6. Aluminum shell material, sturdy and durable.
7. Encasement with sponge plastic box, easy to carry and protect.
Principle
The percentile tube thickness gauge is measured by a combination of mechanical structure and electronic display. During measurement, the lower ball head touches the measured object, and the internal mechanical structure converts the displacement into an electrical signal. Finally, the thickness value is accurately read digitally on the display device. Graduation is 0.01mm.
Applications
Machining, mold manufacturing, product mass inspection, industrial maintenance
Standards
The information does not mention
Steps
1. Check the power of the device to ensure that the LR44 button battery is fully charged.
2. Clean the measurement head and the surface of the measured object.
3. Align the lower ball head of the percentile pipe thickness gauge vertically and contact the measured point.
4. Gently apply pressure to ensure that the measurement head is in stable contact with the measured surface.
5. Read and record the thickness value displayed on the display.
6. After the measurement is completed, put the device back in the sponge plastic box for storage.
Notice
* Please ensure that the battery is fully charged before use, so as not to affect the Measurement accuracy.
* When measuring, keep the measurement head perpendicular to the measured surface to avoid errors caused by tilt.
* Avoid use and storage in humid, dusty or strong magnetic environments.
Do not apply too much force to the equipment to avoid damaging the internal mechanical structure.
* Clean the measurement head after use and put it back in the sponge box for safekeeping.
* Periodically calibrated to ensure Measurement accuracy of ≤ +/- 0.02mm.
