Overview
SYATEK 32CHBF1030QT is an upper and lower round head percentile dial meter with a Measurement range of 0-10mm and a Graduation of 0.01mm. The product features an aluminum case head and cast iron handle, featuring a push handle and ball head type point-to-point contact measurement.
Features
1. Press-type handle design, easy to operate.
2. Ball head type probe to achieve point-to-point contact measurement and reduce measurement errors.
3. Aluminum case head, sturdy and durable.
4. The cast iron handle provides a stable grip.
Principle
Measured values are accurately displayed by the dial meter through point contact between the probe and the surface of the workpiece under test, which transmits tiny dimensional displacements to the internal gear transmission system, amplifies and converts the swirl/spin angle of the pointer on the dial.
Applications
Machining, mold manufacturing, parts inspection, equipment installation and commissioning, mass inspection
Standards
The product information does not mention specific compliance standards.
Steps
1. Clean the measurement surface and probe.
2. Install the dial meter on a suitable watch rack and fix it.
3. Press the handle to make the spherical surface of the probe contact with the measured point.
4. Adjust the dial so that the hands are aligned at zero.
5. Make a measurement and read the value indicated by the pointer on the dial.
Notice
• Before use, please check whether the probe is in good condition and whether the hands are flexible.
• When measuring, the probe should be perpendicular to the measured surface to avoid measurement errors caused by tilt.
• When pressing the handle, the force should be smooth and even to avoid Impact.
• After measurement, the probe should be lifted to avoid long-term pressure.
Do not use in strong magnetic field, corrosion environment or severe vibration.
• Regular cleaning and maintenance to maintain Measurement accuracy.
