Overview
TSF-10A Touchscreen halogen Moisture Analyzer is a precision instrument under the YOKE brand. It adopts halogen heating system and thermal insulation weighing Sensor technology to achieve fast heating, accurate temperature control and weighing, and the test readability reaches 0.01%/1mg. Test speed and accurate results.
Features
1. LCD screen - the 4.3-inch large screen is clearer and brighter, and provides rich measurement information.
2. Convenient operation - touch the button, one-click test, simple operation.
3. Outstanding performance - the use of insulated weighing Sensor technology to prevent the impact of symmetry during heating Precision.
4. Standard USB port - easy to connect printers, computers and other peripherals.
5. Halogen heating - heating is rapid, which greatly reduces the time required for testing.
6. Real-time Linear dispersion - Real-time Linear dispersion display, (moisture, weight and time) is convenient to understand the test progress.
7. Multiple drying modes - standard and fast heating modes can be freely selected.
Principle
The instrument uses the halogen heating system to heat up quickly, and combines the thermal insulation weighing Sensor technology to measure the weight change of the sample in real time and accurately during the heating process, and calculate the Moisture content.
Applications
Food, beverage, agriculture, chemical industry, environmental protection, feed
Standards
GB/T29249-2012 National Standard for Electronic Weighing Drying Method Moisture Analyzer
Steps
1. Turn it on and warm up.
2. Adjust the level of the instrument.
3. Select the drying mode (standard or fast).
4. Set the heating temperature and the measurement end mode (automatic or timed).
5. Place the sample and start the one-click test.
6. Observe the test progress through real-time Linear dispersion to obtain the final moisture result.
Notice
• Ambient Temperature should be kept at 10-30 ℃.
• The relative humidity of the working environment should be ≤ 75%.
• It needs to be preheated for 30 minutes after booting.
• The recommended sample size is 3~ 10g, and the minimum sample size is not less than 0.5g.
• Instruments need to be calibrated by external weight.
• Heating Temperature range is room temperature + 50 ℃ to 160 ℃.
