Overview
YOKE P907 ion meter is a customized single ion detection instrument with High Accuracy measurement and user-friendly Operating interface. It supports fast switching of various Ion concentration units and provides a variety of Measurement modes, suitable for Ion concentration analysis in laboratory and other environments.
Features
1. Adopt a 6.5-inch LED screen with complete parameter display and user-friendly interface design.
2, can store 2000 sets of measurement data, data can be stored in U disk, can be opened by EXCEL.
3. Automatically identify 10 kinds of buffer solutions, allowing self-labeling solution groups.
4. Support automatic 1-5 point calibrating, manual/automatic temperature compensation.
5, allows the measurement of a variety of conventional ions, the instrument randomly provides a variety of common ion mode.
6, mg/L, g/L, mol/L, PX rapid switching of various Ion concentration units.
7. With a variety of Ion concentration Measurement modes, support direct reading concentration Measurement mode, sample addition Measurement mode, GRAN Measurement mode.
8. Optional Bluetooth module, support wireless Bluetooth printing.
9. Comply with IP54 dust-proof and splash-proof design.
Principle
The YOKE P907 ion meter detects specific Ion concentrations in solutions through Ion Selective Electrode (ISE). The instrument measures the potential difference (mV) generated by Electrode and converts the potential signal into the corresponding Ion concentration value according to the Nernst equation for fast and accurate quantitative analysis.
Applications
Laboratory water quality analysis, environment monitoring, industrial process control, scientific research and education
Standards
IP54 dust and splash protection grade
Steps
1. Turn it on and select the corresponding ion Measurement mode.
2. According to the prompt, use the standard buffer solution for 1-5 point calibrating.
3. Immerse the Electrode in the sample solution to be tested.
4. Wait for the reading to stabilize and record or save the measurement results.
5. After the measurement is completed, clean the Electrode and store it properly.
Notice
• Please ensure that the instrument is used in an environment with 5~ 35 ° C and Humidity ≤ 85%.
• Before calibrating and measuring, confirm that Electrode is in good condition and connected correctly.
• Please clean the Electrode in time after use and store it according to the specifications.
When exporting data, use a compatible USB stick and ensure that the file format is correct.
• The optional Bluetooth printing function needs to be used with the designated module.
