Please contact customer service
With large-screen LCD display, it has the function of automatically identifying 13 kinds of pH buffer and 8 kinds of conductivity standard solution, supports the measurement range of 0.5μS/cm to 200mS/cm, and can meet the accuracy of calibrating, and has professional mode such as high-purity water pH measurement.
Category : Water Quality Tester
Brand : Yoke
SKU : NB039408
Service :The delivery and service By NBCLab.Com
YOKE P613 is a P6 series dual-parameter acidity meter/Conductivity Meter with integrated pH and conductivity measurement functions. The instrument features a large-screen LCD display with various intelligent functions such as automatic identification of Electrode, Automatic calibration, Data storage, etc., and is suitable for accurate measurement of various water quality parameters.
1. Large LCD display, white backlight controllable. 2. Humanized bracket type and non-slip glove design, easy to operate. 3. Dual parameter instrument, automatic identification pH Electrode and Conductivity detector Electrode. 4. Built-in microprocessor, with Automatic calibration, temperature compensation, Data storage, self-diagnosis and other functions. 5. Automatically identify 13 pH standard buffer solutions, supporting three series in Europe, America, NIST and China. 6. High purity water pH Measurement mode and ammonia pure water pH Measurement mode can be set. 7. Automatically identify 8 kinds of conductivity standard solutions, support two series in Europe, America and China. 8. Using advanced conductivity measurement technology, K = 1 Electrode calibrated to meet the accuracy requirements of 0.5 μS/cm~ 200 mS/cm. 9. Switchable measurement conductivity, TDS, salinity and resistivity, TDS and salinity using polynomial calculation to ensure accuracy. 10 conductivity measurement with high purity water nonlinear temperature compensation function. 11. The instrument meets the IP57 waterproof rating and is equipped with a calibration solution and a suitcase.
The instrument is controlled by a built-in microprocessor chip and automatically recognizes and connects to pH Electrode or Conductivity detector Electrode for measurement. For pH measurement, the instrument senses the activity of hydrogen ions in the solution through Electrode and automatically performs temperature compensation and calibrating. For conductivity measurement, the instrument measures the conductive ability of the solution through Conductivity detector Electrode and can be automatically converted to TDS, salinity or resistivity values, and has the function of nonlinear temperature compensation for high-purity water.
Water quality testing, laboratory analysis, environment monitoring, industrial process control, education and research
ISO9001:2000、CE、CMC
1. Install the battery and turn it on. 2. According to the measurement requirements, connect the corresponding pH Electrode or Conductivity detector Electrode, the instrument will automatically identify. 3. Enter the calibrate mode, immerse the Electrode in the corresponding standard buffer solution (pH) or standard solution (conductivity), and the instrument can automatically identify and complete the calibrate. 4. Electrode immersion in the sample to be tested. 5. Read and record the stable Measured values (such as pH, conductivity, TDS, etc.) displayed on the screen. 6. After the measurement is completed, the stored measurement data can be viewed. 7. Clean Electrode and shut down after use.
• Please ensure that the Electrode is connected to the instrument correctly and firmly. • Before calibrating and measurement, clean Electrode with deionized water and blot dry with filter paper. • Please calibrate with a standard solution that is recognizable by the instrument, within a valid period and not contaminated. • When measuring different samples, be sure to clean the Electrode to prevent cross-contamination. • The instrument has an automatic shutdown function to save power. Please pay attention to the low voltage prompt and replace the battery in time. • Although the instrument has an IP57 waterproof rating, it should still avoid long-term immersion or strong water flow Impact. • Do not use or store beyond the specified Ambient Temperature (5~ 35 ° C) and Humidity (≤ 85%). • Electrode is a precision part, please use and store it carefully to avoid collision or drying. • Dispose of discarded batteries and Electrodes in accordance with local regulations.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
