Overview
YOKE P902 Keypad Operation Benchtop Conductivity Meter is a fully functional Benchtop measuring instrument for the measurement of conductivity, resistivity, TDS, salinity and temperature. It features a 6.5-inch LED large screen display, built-in mass storage, and supports USB data output, wireless Bluetooth printing and other intelligent functions. It meets IP54 dust and splash protection rating.
Features
1. Adopting a 6.5-inch LED screen, the parameter display is complete and intuitive, and the interface operation is user-friendly.
2. Adopt Omron long life touch button, convenient and durable.
3. Meet the international standard GLP requirements, with Automatic calibration, automatic temperature compensation, data storage, USB output, clock display, wireless printing, function settings and self-diagnostic information and other intelligent functions.
4. Built-in mass storage can store 2000 sets of measurement data, data can be transferred through U disk, storage data can be opened by EXCEL.
5. Automatically identify 8 kinds of conductivity standard solutions, you can choose European, American and Chinese series.
6. Using excellent conductivity measurement technology, the Conductivity detector Electrode with constant K = 1 only needs a little calibrating to meet the Measurement accuracy requirements of 0.5 μS/cm~ 200 mS/cm.
7. Switchable conductivity, TDS, salinity and resistivity. TDS and salinity are calculated using polynomials to ensure full scale conversion accuracy.
8. The instrument can be equipped with an optional Bluetooth module and supports wireless Bluetooth printing.
9. Comply with IP54 dust and splash-proof design.
Principle
Conductivity detector Electrode measurements the conductive capacity of the solution and converts it into a conductivity value. Built-in temperature sensor for automatic temperature compensation ensures that the measurement results are based on a set reference temperature (e.g. 25 ° C). The instrument automatically recognizes the standard solution for calibration and uses polynomial calculation to achieve High Accuracy conversion of TDS and salinity.
Applications
Use comma to list, except for those involving multiple levels of classification
Standards
Comply with GLP requirements of international standards
Steps
1. Turn it on and check the status of the instrument.
2. Select conductivity, TDS, salinity or resistivity mode according to measurement requirements.
3. Electrode the Conductivity detector into the solution to be tested.
4. The instrument can automatically identify the standard solution for calibrating (if required).
5. Read and confirm the measurement results (including values, units, temperature and time) displayed on the screen.
6. Data can be stored by pressing the button, or output data through USB interface and wireless Bluetooth (optional).
Notice
• Make sure the Electrode constant setting matches the Electrode used (0.1/1/10 cm-1).
• Environmental humidity of the instrument is recommended to be within the range of 5~ 85% RH.
When making accurate measurements, pay attention to the temperature compensation range of the instrument and the reference temperature setting.
When transferring data using a USB flash drive, ensure that the instrument is connected to the storage device stably.
• Optional Bluetooth printing function requires confirmation that the module has been installed correctly.
• The instrument meets the IP54 Protection Rating, but it is still necessary to avoid prolonged immersion or strong splashes.
