Overview
YOKE P912 Keypad Operation Benchtop Conductivity Meter is a full-featured Benchtop measuring instrument that can measure conductivity, resistivity, TDS, salinity and temperature. The instrument uses a 6.5-inch LED screen, which is intuitive to operate and conforms to GLP specifications. It has a variety of intelligent functions such as Data storage, USB output, wireless printing, and supports Bluetooth module optional.
Features
1. Adopt a 6.5-inch LED screen with complete parameter display and user-friendly interface operation.
2. Adopt Omron long life touch button, high durability.
3. Meet GLP requirements, with automatic calibration, automatic temperature compensation, data storage, USB output, clock display, wireless printing, function settings and self-diagnosis and other intelligent functions.
4. Built-in mass storage can store 2000 sets of measurement data, data can be transferred through U disk, and can be opened and edited by Excel software.
5. Automatically identify 8 kinds of conductivity standard solutions, you can choose European, American and Chinese series.
6. Using excellent conductivity measurement technology, the K = 1 Conductivity detector Electrode only needs a little calibrating to meet the measurement accuracy requirements of 0.5 μS/cm~ 200 mS/cm.
7. Switchable measurement conductivity, TDS, salinity and resistivity, TDS and salinity use polynomial calculation to ensure full scale conversion accuracy.
8. Optional Bluetooth module, support wireless Bluetooth printing.
9. Comply with IP54 dust and splash-proof design.
Principle
Conductivity detector Electrode measurement of the conductivity of the solution and conversion based on the Electrode constant. Built-in temperature sensor for automatic temperature compensation, the Measured value is compensated to the reference temperature (e.g. 25 ℃). The built-in algorithm can further calculate the resistivity of the solution, TDS (total dissolved solids) and salinity value.
Applications
Laboratory water quality analysis, industrial process control, environment monitoring, aquaculture, agricultural irrigation, education and research
Standards
GLP specification
Steps
1. Turn it on and check the status of the instrument.
2. Select the Measurement mode (conductivity, TDS, salinity or resistivity) according to the measurement requirements.
3. Electrode the Conductivity detector into the solution to be tested.
4. The instrument automatically performs temperature compensation and measurement, and the screen displays stable readings.
5. For calibrating, use the standard solution to follow the instrument prompts for Automatic calibration.
6. After the measurement is completed, the data can be automatically stored or exported through the USB interface.
Notice
• Please select the appropriate Electrode constant (0.1/1/10 cm-1) Conductivity detector Electrode according to the Measurement range.
• When calibrating, the standard solution series (European, American or Chinese series) automatically recognized by the instrument should be used.
• Environmental humidity of the instrument is 5~ 85% RH, do not use in environments beyond this range.
• The instrument meets IP54 Protection Rating and is dust- and splash-proof, but not completely waterproof. Please avoid soaking.
• When transferring data using a USB stick, please ensure that the USB stick format is compatible.
• The optional Bluetooth printing function needs to be used with the corresponding Bluetooth module and printer.
