Please contact customer service
7-Inch high-resolution capacitive Touchscreen, intuitive operation. Built-in pH, Conductivity Detector, dissolved oxygen three modules, can detect 9 paraMeters. Meet GLP requirements, with Automatic calibration, temperature compensation and 2000 data storage functions.
Category : Water Quality Tester
Brand : Yoke
SKU : NB039442
Service :The delivery and service By NBCLab.Com
The YOKE P705 Touchscreen Portable 3-in-1 measurement instrument is a Multi-Parameter measurement instrument for High Accuracy measurement in the laboratory, covering a variety of electrochemistry parameters such as pH, conductivity and dissolved oxygen. It is suitable for petroleum, chemical, power plant and environmental protection industries, and has a wider range of applications in education and scientific research. The instrument has built-in pH module, Conductivity detector module and dissolved oxygen module to detect ph value /mV/conductivity/resistivity/TDS/salinity/dissolved oxygen concentration/dissolved oxygen Saturation/temperature.
1.7-Inch color high-resolution capacitive Touchscreen, UI design, navigation operation, Sensitivity high, intuitive display. The host shell is made of PEEK material, high temperature resistance, corrosion resistance, Aging Resistance. 2. Built-in ARM32-bit microprocessor, using digital filtering and slip technology to improve Response speed and measurement accuracy. The circuit board adopts SMT patch process, which has high Reliability. 3. The main interface can display multiple detection values at the same time, and click the module to view the details and calibrate. 4. Meet GLP requirements, with automatic calibration, automatic temperature compensation, data storage, USB output, clock display, wireless printing, function settings and self-diagnosis and other intelligent functions. 5. Built-in Chinese and English bilingual Operating system, adjustable luminance, temperature unit can be switched. Equipped with temperature Electrode can automatically perform temperature compensation. 6. Built-in mass storage can store 2000 sets of measurement data, data can be transferred through U disk, and opened and edited with EXCEL. 7. Optional Bluetooth module, support wireless Bluetooth printing. 8. Based on the YOKE Instrument intelligent Internet of Things platform system of WeChat Mini Program, the mobile phone can view the instrument data in real time. 9. New Polarographic Dissolved Oxygen Electrode can measure temperature and dissolve oxygen at the same time, and the polarization time is short (3~ 5 min). Use a combined diaphragm cap for easy replacement. 10 dissolved oxygen measurement with automatic temperature compensation, automatic salinity compensation and automatic air pressure compensation function. 11. Strong scalability, can quickly replace different pH Electrode and conductivity Electrode to adapt to different samples. 12. Automatically identify 8 kinds of conductivity standard solutions (Europe, America, China series) and 15 kinds of pH standard buffer solutions (Europe, America, NIST, China series). 13. Electrode status can be intelligently judged to ensure accurate use. 14. Switchable conductivity, TDS, salinity and resistivity display. TDS and salinity are calculated using polynomials to ensure full scale conversion accuracy. 15. Powered by rechargeable lithium batteries, it supports power and mobile power charging. 16. Comply with IP54 dust and splash protection grade design.
The instrument uses the built-in pH module, Conductivity detector module and dissolved oxygen module to detect the hydrogen ion concentration, conductive ability and dissolved oxygen content in the solution respectively. The built-in microprocessor processes the sensor signal, and uses automatic temperature compensation, digital filtering and other technologies to convert the electrochemistry signal into an accurate value displayed on the Touchscreen.
Petroleum, chemical industry, power plant, environmental protection, education, scientific research
GLP
1. Turn it on and check the status of the instrument. 2. According to the measurement items (such as pH, conductivity, dissolved oxygen), install or replace the corresponding Electrode. 3. If you need to calibrate, enter the corresponding project module and use the standard solution for automatic or Manual calibration. 4. Immerse the Electrode in the solution to be tested to ensure adequate contact. 5. Read stable measurement values on the main interface or detailed interface. 6. After the measurement is completed, the data can be saved to the instrument or exported through the U disk. 7. Electrode clean and store properly.
• Do not use the instrument under conditions exceeding the specified Ambient Temperature (5~ 35 ℃ or 15~ 30 ℃) and Humidity (≤ 75%). • Please ensure that the Electrode is in good condition before use, and the instrument can intelligently determine the Electrode status for reference. • Before making accurate measurements, it is recommended to calibrate the instrument with the corresponding standard solution. • When replacing the sensitive film of dissolved Oxygen electrode, please use the matching combined diaphragm cap and tighten it. • When measuring dissolved oxygen, the instrument has an automatic compensation function, but please ensure that the environment pressure is within the compensation range (80~ 105kPa). • The instrument has an IP54 Protection Rating, but it is still necessary to avoid prolonged immersion or strong splashes. • Please use the specified charging method to charge the built-in lithium battery. • Data storage and export, make sure the USB flash drive is compatible and operated correctly to prevent data loss. • Optional Bluetooth printing function, you need to ensure that the printer and the instrument are successfully paired. When connecting to the IoT platform, please ensure that the mobile network is unblocked and the Mini Program is operated correctly.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
