Overview
HUXI HT-R330 Rocker Shaker is a 3D Shaker suitable for Electrophoresis gel staining/decolorization, sample washing, molecular hybridization, settling, protein imprinting, cell fostering and other applications. It can also be used for cell fostering and cell membrane transfer, and can be used in cryogenic and Thermal Chambers.
Features
1. The molded shell is resistant to acid and alkali, does not deform, and is easy to clean. The maximum load is 5kg (including fixtures). A variety of trays and fixtures are available.
2. With skirt power switch and timing, speed regulation and power socket jack, it can prevent short circuit of corrosion power supply of switch and speed regulation timing parts when liquid leakage;
3. LCD display, displaying time and speed respectively, flipping up and down, with a tilt angle of up to 10 degrees Celsius.
4. The speed range is 10-80 rpm, and the motor is designed with a wide voltage to meet the needs of different regions.
5, the whole machine adopts the arm bearing swirl/spin design, firm, no abrasion, suitable for long-term use; ultra-small design, does not take up space, can be used in the refrigerator.
Principle
The Shaker is powered by a motor to drive the crank bearing swirl/spin to achieve a three-dimensional shaking function, with a tilt angle of up to 10 ° and an adjustable speed range of 10-80 rpm. It is suitable for sample mixing and fostering under a variety of experimental conditions.
Applications
Electrophoresis gel staining/decolorization, sample washing, molecular hybridization, settling, protein imprinting, cell fostering, cell membrane transfer
Standards
Shell Protection Rating: IP21
Steps
1. Connect power supply, voltage range 100-240V, Frequency 50/60Hz;
2. Select and install the appropriate tray or fixture as required.
3. Set Timer Range 0~ 99h59min and Speed Range 10~ 80rpm through LCD display;
4. Start the equipment and perform shaking operations.
5. Turn off the power after use and clean the equipment.
Notice
• The maximum load is 5kg (including the fixture), please do not overload it;
• Permissible Ambient Temperature 5-40 ℃, relative humidity does not exceed 80%;
• Prevent liquid leakage, avoid corrosion switches and speed control parts;
• Can be used in Low Temperature and Thermal Chambers, but ensure that the Ambient Temperature is within the allowable range;
• Power supply voltage check before use;
• Regularly clean the shell and keep the equipment hygienic.
