Overview
A.shine 57 Dyne pen is a professional tool for testing the surface tension of materials. It has a built-in 15ml test solution and can be used more than 100 times for repeatability. It can accurately test the surface tension of materials such as Plastic film, helping users determine whether the material is suitable for printing, compounding or vacuum aluminizing processes, so as to effectively control the mass and reduce losses.
Features
1. Built-in 15ml test solution, which can be used more than 100 times
2. Shelf life is 6-8 months
3. The pen tip is carefully designed to reduce the contact between dyne liquid and air
4. Each pen has undergone multiple inspections, quality assurance
5. Strictly comply with ASTM Standard D2578 and TAPPI T698
Principle
Dyne pen Apply a specific Dyne Level test solution to the surface of the material and observe whether the liquid cissing within 3 seconds to determine whether the surface tension of the material reaches the selected Dyne Level. If there is no cissing, the standard is met; otherwise, it is not met.
Applications
Plastic film: PS, PE, PP, PET, PI, PC, NY, CPP, OPP, PVC, conductive materials: aluminum foil, copper foil, carbon foil, vapor coating, Miscellaneous materials: Glass, ceramics, plastic sheet, plastic pipe
Standards
ASTM Standard D2578、TAPPI T698
Steps
1. Choose the right Dyne Level corona pen
2. Clean the film surface and lay it flat on a horizontal table
3. Use a corona pen to stroke lightly on the film surface
4. If the liquid does not cissing within three seconds, the selected dyne is reached, otherwise it is not reached
Notice
Avoid skin/eye contact
Avoid inhaling vapors, mists, or gases
Keep away from heat and ignition sources
