Overview
A.shine 68 Dyne pen is a professional tool for testing the surface tension of materials. It has a built-in 15ml test solution and can be used more than 100 times for repeatability. It can accurately test whether the surface tension of materials such as Plastic film reaches the set value, help users determine whether the material is suitable for printing, compounding or vacuum aluminizing processes, effectively control mass and reduce losses.
Features
1. Built-in 15ml test solution, which can be used more than 100 times
2. Shelf life is 6-8 months
3. The pen tip is carefully designed to reduce the contact between dyne liquid and air
4. Each pen has undergone multiple inspections, quality assurance
5. Strictly comply with ASTM Standard D2578 and TAPPI T698
Principle
Dyne pen through the nib Spreader specific Dyne Level test liquid on the surface of the material, observe whether the liquid cissing within 3 seconds to determine whether the surface tension of the material reaches the set value. If the liquid has no cissing, the surface tension is up to standard; otherwise, it is not up to standard.
Applications
Plastic film: PS, PE, PP, PET, PI, PC, NY, CPP, OPP, PVC, conductive materials: aluminum foil, copper foil, carbon foil, vapor coating, Miscellaneous materials: Glass, ceramics, plastic sheet, plastic pipe
Standards
ASTM Standard D2578、TAPPI T698
Steps
1. Choose the right Dyne Level corona pen
2. Clean the film surface and lay it flat on a horizontal table
3. Use a corona pen to stroke lightly on the film surface
4. If the liquid does not cissing within three seconds, the selected dyne is reached, otherwise it is not reached
Notice
• Avoid skin/eye contact
• Avoid inhaling vapors, mists or gases
Keep away from heat and ignition sources
