Overview
LICHEN Technology Hydrothermal Synthesis Reaction Kettle (model LC-KH-25), also known as coalescence Reaction Kettle, high voltage digestion tank, etc., is a closed container for the analysis of insoluble substances. It can be used for sample pretreatment in atomic absorption spectroscopy (AAS) and plasma emission analysis, small-dose synthesis reactions, and can quickly digest insoluble substances using strong acids or bases in the tank and high temperature and high voltage closed environment. It is suitable for sample pretreatment of chemical analysis methods such as gas phase, liquid phase, plasma Light spectrum mass spectrometry, atomic absorption and Atomic fluorescence.
Features
1. The kettle body is made of non-magnetic 304 stainless steel.
2. The inner lining is made of polytetrafluoroethylene, which can resist acid and alkali.
3. Reaction Kettle can play a sealing role after tightening, and the sealing effect is stable for a long time without leakage.
4. Beautiful appearance, reasonable structure, easy operation and good corrosion resistance.
5. Compact size makes it convenient for multiple Reaction Kettles to operate at the same reaction temperature.
Principle
The Reaction Kettle achieves sealing by pressing and manually fastening the threaded cap to form a high temperature and high voltage closed environment. In this environment, strong acid, strong alkali or high temperature conditions are used to accelerate the analysis of insoluble substances or promote the synthesis of reactions.
Applications
Atomic absorption spectroscopy (AAS) analysis sample preprocessing, plasma emission analysis sample preprocessing, small dose synthesis reaction, gas phase analysis sample preprocessing, liquid phase analysis sample preprocessing, plasma Light spectrum mass spectrometry sample preprocessing, Atomic fluorescence analysis sample preprocessing
Standards
The data did not mention specific compliance criteria.
Steps
The information does not mention the specific operation steps.
Notice
• Maximum Operating Pressure should be ≤ 3Mpa.
• Operating temperature should be ≤ 220 ℃ (with PPL lining, the maximum temperature can be ≤ 260 ℃).
• Heating and cooling rate should be ≤ 5 ℃ /min.
