Overview
LC-MSB-S Magnetic Stirrer is a laboratory instrument for liquid mixing, mainly used for stirring or simultaneous heating of low viscosity liquids or solid-liquid mixtures. With the heating temperature Control system, the sample temperature can be heated and controlled according to the specific experimental requirements, and the temperature conditions required for the experimental conditions can be maintained to ensure that the liquid mixture meets the experimental requirements.
Features
1. DC brushless motor, low noise, maintenance-free, smooth operation.
2. Select strong magnetic and high temperature resistant magnetic steel to ensure sufficient suction and torque, effectively prevent jumpers, and the stirring effect is remarkable.
3. Integrated die-casting aluminum plate, uniform temperature, fast heating speed, surface ceramic lame plating, corrosion resistance, non-slip, wear resistance.
Principle
The Magnetic Stirrer drives the internal magnet swirl/spin through a DC brushless motor to generate a swirl/spin magnetic field. A stirrer (magnetic rotor) is placed in a container placed on the Stirrer work plate, and the stirrer synchronizes the swirl/spin under the action of the swirl/spin magnetic field, so as to realize the stirring and mixing of the liquid in the container.
Applications
Laboratory liquid mixing, solid-liquid mixture stirring
Steps
1. Place the instrument on a stable bench and connect it to the AC220V/50Hz power supply.
2. Place the container containing the liquid to be stirred and the stirrer in the center area of the working plate.
3. swirl/spin Rotation speed adjustment knob, set the desired stirring speed (200-1600rpm).
4. Start stirring, observe the stirring state and adjust the Rotation speed as needed.
Notice
• Power supply voltage is AC220V and Frequency is 50Hz.
• The instrument should be placed on a stable, drying and well ventilated workbench.
• Max. stirring Capacity (for example, water) is 5L, please do not overload.
• The working plate is made of tempered Glass, please avoid violent collision or local overheating.
• The stirrer must be made of strong magnetic material and ensure that the bottom of the container is flat for the best stirring effect.
• After use, please turn off the power and unplug the power plug.
• When cleaning the instrument, please disconnect the power supply and wipe it with a soft cloth to avoid liquid entering the instrument.