Overview
AISRY ASR-5028 boil test chamber is a device for Reliability testing of electronic components. It is suitable for accelerated aging life test before tin staining test of electronic connectors, semiconductor ICs, transistors, diodes, liquid crystal LCDs, chip resistors and capacitors, as well as oxidation test of semiconductors, passive components, and part pins. The device adopts microcomputer temperature controller, LED digital display, PID + SSR control, platinum resistance temperature sensor (PT-100), resolution up to 0.1 ° C, and is equipped with automatic safety protection device.
Features
1. The inner and outer boxes are made of SUS304 stainless steel. Appearance is beautiful and not easy to age.
2. Equipped with a stainless steel water tank, it supports manual water addition or external tap water. When the water level is low, it can be replenished manually or automatically to ensure that the experiment is not interrupted.
3. Adopt Japanese Omron temperature control, PID control and SSR output, accurate temperature control, high Reliability at high temperature.
4. Timer can be set in a variety of settings (seconds, minutes-seconds, minutes, hours-minutes, hours), with power outage memory function, and can continue to work according to the set time after calling.
5. Adopting a full detection system, the lights are turned on when malfunctions occur, allowing operators to keep abreast of equipment conditions.
6. The heating system uses a titanium tube heating tube, which is not easy to corrode and has a longer service life.
7. High Stability Platinum Probe with Less Error.
8. Comply with military regulations MTL-STP-208F and 202 standards.
Principle
The device precisely controls the water temperature in the box through a microcomputer temperature controller, and uses PID + SSR Control mode and platinum resistance temperature sensor (PT-100) to achieve High Accuracy Temperature Regulation. The built-in heating system (titanium tube heating tube) heats the water in the tank to produce a stable steam environment, so that the tested electronic components are subjected to accelerated aging or oxidation tests under set high temperature and high humidity conditions to evaluate their Reliability and tin exposure performance.
Applications
Electronic connectors, semiconductor ICs, transistors, diodes, liquid crystal LCDs, chip resistors and capacitors, component industry Electronic components Metal pins Aging accelerated life time test before tin staining test, semiconductor, passive components, part pin oxidation test
Standards
MTL-STP-208F、202
Steps
1. Check the power supply and water level of the equipment, and add water manually or connect to an external water source as required.
2. Put the tested sample into the inner box.
3. Set the required test temperature (up to 97 ° C) and test time (Timer maximum setting 9999 minutes) through the microcomputer controller.
4. Start the equipment, the heating system starts to work, and it can be heated to the set temperature in about 45 minutes.
5. The equipment runs automatically, stopping or continuing according to the setting time.
6. After the test is completed, the sample is taken out and followed up for evaluation.
Notice
• Power supply voltage 220V, power 2KW, and reliable connection before running the equipment.
• Pay attention to the water level to prevent dry burning at low water level, and use the automatic water replenishment function.
• Please pay attention to high temperature steam during operation to avoid burns.
• When the fault occurs, please check the problem according to the light display. Non-professionals should not disassemble and repair by themselves.
• When not in use for a long time, empty the water tank and keep the equipment drying.
