Overview
The Abrasion tester (model: ASR-8908) is used to test the travel case and travel bag with wheels to detect the wear resistance of the wheels and axles and whether the overall structure of the box is damaged or deformed during the bumpy travel. The test results can provide a reference for product improvement.
Features
1. The test speed can be adjusted within the range of 0-5km/h to meet different test requirements.
2. The time setting range is 0-999.9 hours, and it has a power failure memory function.
3. Equipped with a suitcase fixed adjustment seat made of SUS304 stainless steel to assist in fixing the specimen.
4. Equipped with automatic shutdown function when the test piece is dropped in the middle to ensure the safety and accuracy of the test.
5. Use specific specifications of bumping plate (5mm/8) and belt (circumference 380cm) to simulate the real walking bumping environment.
Principle
The test machine simulates the state of the bag walking on the road by driving the belt to rotate through the motor. The bag under test is fixed on the adjustment seat, and its wheels are in contact with the rotating belt. The bumping plate set by the equipment periodically impacts the belt, causing bumps to the belt, thereby applying continuous bumping and abrasion to the wheels, axles and overall structure of the bag to evaluate its durability.
Standards
SAMSONITE standard
Steps
1. Fix the tested suitcase or travel bag on the SUS304 fixed adjustment seat.
2. According to the test requirements, set the test speed (0-5km/h) and test time (0-999.9 hours) through the control panel.
3. Start the equipment and start the test.
4. During the test, the equipment will simulate a bumpy walking state to test the luggage.
5. When the set time is reached or the specimen is dropped halfway, the equipment will automatically shut down.
6. After the test, check the abrasion, damage or deformation of the luggage wheels, axles and the overall structure.
Notice
The rated voltage of the equipment is AC 220V 50Hz, please ensure that the power supply matches and is safely grounded.
When placing the test piece, be sure to use a fixed adjustment seat to firmly fix it to prevent it from being displaced or thrown out during the test.
During the operation of the equipment, do not approach the rotating parts to ensure personal safety.
Regularly check the abrasion of key components such as belts and bumps, and carry out necessary maintenance.
* Dimensions of the equipment are large (2200 × 1800 × 1600mm) and the weight is about 360kg. Please ensure that the ground of the installation site is flat, the load-bearing is sufficient and the space is sufficient.
