Overview
DAQTECH DT-60 tunnel furnace temperature tester is a special temperature measurement system for industrial furnaces, widely used in painting and heat treatment industries. It can measure and map the temperature of metal products in normalizing furnaces, annealing furnaces, nitriding furnaces, tempering furnaces and other processes Linear dispersion. Through this system, users can set and optimize the temperature process, regularly monitor the temperature of metal products and workpieces without interrupting the normal production process. The recorder can obtain up to 16 points of temperature test Linear dispersion on the surface of the workpiece at a time, and can optionally be equipped with wireless real-time synchronous recording data function.
Features
1. Set the temperature and transportation speed in the oven temperature zone
2. Time between any two temperature values
3. The slope between any two temperature values
4. Maximum temperature and arrival time
5. Horizontal temperature line, vertical time line, and time between two times
6. Test date and time
7. Input of company name, product name and remarks
8. Export the temperature data report to Excel for editing
9. Insert picture function to make the temperature test point location clear at a glance
10. The software clears the instrument memory data method
11. Manual and specified temperature three start-up methods
12. Up to 8 types of Probes to choose from
13. Adopt standard voltage calibrated and provide cold node temperature correction
14. Can receive data wirelessly/wirelessly in real time (optional)
15. The instrument is powered off, intelligently save the data when the power is off
16. Can be tested multiple times and store up to 16 sets of data
17. Adopt USB communication port, fast download and charging, and can last for 50 hours after being fully charged
18. Various indicator lights clarify the various application status of the instrument, one-click operation, easy to learn and use
Principle
The system passes through the industrial furnace heating equipment through the recorder, and uses the Thermocouple Probe to collect temperature data, which can be transmitted wirelessly or wirelessly in real time. The instrument uses standard voltage calibrating and cold node temperature correction to ensure temperature measurement accuracy, and supports multiple start and stop modes to intelligently save data without interrupting the production process.
Applications
Painting, heat treatment industry, normalizing furnace, annealing furnace, nitriding furnace, tempering furnace
Standards
Voltage calibrated, temperature calibrated
Steps
1. Select Probe type and connect
2. Set the start mode (button start, delayed start or temperature start)
3. Configure sampling Frequency and temperature measurement parameters
4. Place the recorder in an industrial furnace to begin testing
5. Real-time monitoring of temperature data
6. Stop recording after the test is completed
7. Download data to the computer through the USB port
8. Use software to analyze data and export reports
Notice
• The temperature resistance of the instrument is 80.0 ° C, avoid using it beyond this temperature
• Hot box temperature 300 ℃, Measurement time does not exceed 40 minutes
• Power supply voltage in the range of DC3.7V~ DC4.2V
• Wireless transmission function is optional, you need to confirm the configuration.
• Regularly calibrate the instrument to ensure temperature measurement accuracy
• The data is automatically saved when the instrument is powered off, but it is recommended to back it up in time
• Check battery level before use to avoid test interruption
