Overview
The BOSEAN K-G60 (Cl2) is a stationary Gas detector designed to detect chlorine gas (Cl2). The range of the device is 0~ 20ppm, optional 0~ 100/1000ppm, resolution up to 0.1ppm, High Accuracy detection capability, suitable for continuous monitoring in industrial environments.
Features
1. Supports a variety of Sensor types, including electrochemistry, catalytic combustion, semiconductor, PID light ion and infrared gas Sensors.
2. Provide a variety of Installation methods: Wall-Mounted, Pipeline type (thread size M35X1.5mm), Flow type and Pump type.
3. Flexible transmission mode, standard 4-20mA and RS485 (MODBUS RTU protocol), optional 433MHz wireless transmission.
4. With high Protection Rating IP65 and explosion-proof certification (Exd II T6 GB, CNEx16.0449), to ensure safety and reliability.
5. Response Time and Recovery Time ≤ 20s, detection accuracy ≤ +/- 3% F.S, Linearity ≤ +/- 1% F.S.
Principle
The detector detects chlorine concentration in the environment through built-in Sensors (such as Electrochemical sensors), converts gas concentration signals into electrical signals, and outputs 4-20mA analog signals within the standard range after processing or transmits data through RS485 digital interface to realize real-time monitoring and alarm functions.
Applications
Industrial gas monitoring, chemical production, environment safety, sewage treatment, metallurgical industry
Standards
Exd II T6 GB、CNEx16.0449
Steps
1. Select the appropriate installation location to ensure the correct installation of wall hangings, pipes, circulation or pumping methods.
Connect Power Supply DC24V +/- 15% and use cable (3X1.5mm2 Shielding cable).
3. Configure the transmission method, such as connecting a 4-20mA output or an RS485 interface.
4. Set the alarm point: low alarm 5PPM, high alarm 10PPM.
5. Start the equipment, perform zero-point calibrating and functional testing to ensure normal operation.
Notice
• Working Ambient Temperature should be kept in the range of -20~ 50 ℃, Humidity ≤ 95% RH and no condensation condensation.
• Pay attention to explosion-proof requirements during installation and avoid use in non-explosion-proof areas.
• Regularly check Sensor zero drift to ensure accuracy ≤ +/- 1% (F. S/year).
• Use Shielding cable connections to reduce signal interference.
• Pay attention to the load capacity when outputting the relay: 30VDC 2A or 220VAC 0.3A.
