Overview
SAFETAK GC60S-4 is a smart 4-in-1 Gas detector that simultaneously detects combustible gases (EX), oxygen (O2), carbon monoxide (CO) and hydrogen sulfide (H2S). The product uses a TPE/ABS double-decked one-shot molding case with IP67 high Protection Rating for good waterproof, dustproof, anti-drop and electromagnetic interference performance. Built-in rechargeable lithium-ion battery, normal Working time can reach 24 hours.
Features
1. Full Chinese menu interface (built-in multiple languages, English menu optional), can display all Sensor values at the same time, with automatic sensing to adjust the display direction function.
2. Intrinsically safe design, equipped with intrinsically safe catalytic combustion Sensor.
3. Using super intelligent Sensor identification technology, five Sensor installation positions are available for users to replace any gas type Sensor module at will.
4. With a fall alarm function, it can issue an alarm after the carrier accidentally falls to the ground.
5. Protection Rating up to IP67, the shell adopts TPE/ABS double-decked one-time molding technology.
6. Sensor selects international good brands to ensure the high quality of products.
Principle
The detector adopts continuous detection mode, and detects the target gas through built-in different principle Sensors. Combustible gas (EX) adopts catalytic combustion or anti-poisoning infrared principle Sensor; oxygen (O2) and toxic gases (CO, H2S) use electrochemistry principle Sensor; carbon dioxide and hydrocarbons use infrared principle Sensor; organic compounds use semiconductor principle Sensor. After the detected gas concentration information is processed, it is displayed on the point array LCD screen, and when the concentration exceeds the standard, it will be alarmed by acoustic (greater than 90dB) light (wide-angle red LED flashing).
Applications
Petroleum, chemical industry, metallurgy, electric power, urban gas, fire rescue, plastics industry, ships, hazardous chemicals treatment, limited space operations, municipal construction
Standards
GB3836-2010 "Electrical equipment for explosive gas environment", GB12358-2006 "General technical requirements for working environment Gas detection alarm instrument"
Steps
1. Check whether the Appearance and accessories of the equipment are in good condition before starting.
2. Long press the power button to start the device and wait for the Sensor to warm up and complete the self-test.
3. Observe the display screen to confirm that all Sensor values are displayed normally and there is no alarm.
4. Wear the detector on the chest or hand-held, and enter the area to be tested for continuous monitoring.
5. In the event of a sound and light alarm, you should immediately evacuate to a safe area in accordance with safety procedures and investigate the cause.
6. After use, shut down and perform cleaning and maintenance.
7. Regularly charge the device to ensure that the battery is fully charged.
Notice
* Do not use in environments exceeding -20~ 55 ℃ Temperature range or Humidity ≥ 95% RH (condensation).
* Do not disassemble or modify the detector without authorization, so as not to affect the explosion-proof performance and safety.
Avoid strong impact or falling of the detector.
* Regular calibration and functional checks to ensure detection accuracy and Reliability.
* Please use the original charger when charging and ensure a safe environment.
* Sensors are consumables and need to be replaced regularly according to usage.
When alerting, you should give priority to confirming your own safety before dealing with the alarm situation.
