KORNO MOT500-CO2-Y CO concentration Detector Electrochemical sensor 2.4 inch color screen, multiple signal output

Overview

MOT500-CO-Y series CO concentration detector is suitable for CO gas concentration detection and analysis in various environments. It adopts imported electrochemistry gas Sensor and microcontroller technology. Response speed is fast, Measurement accuracy is high, Stability and Repeatability are good. The instrument adopts 2.4 inch industrial grade color screen, which completely displays various technical indicators and gas concentration values; at the same time, it has a variety of circuit protection functions to effectively prevent instrument damage caused by various factors. Optional online environment detection platform, access to various servers and end points through various transmission methods, realize remote monitoring, control and alarm, and can perform data operation on computers, mobile phones and other equipment.

Features

1. Utilize a new semiconductor nano process for ultra-low power 32-bit microprocessors. 2. Adopt 2.4-inch industrial-grade color screen with a resolution of 320x240. 3. PPM,% VOL, mg/m3 three concentration units can be freely switched. 4. Various signal output options: 4-20mA, RS485, 0-5V, 0-10V, Frequency signal, switching signal. 5. A variety of transmission methods are available: 3-4 core cable, optical fiber, network cable, GPRS transmission, wireless transmission, and video transmission. 6. A variety of data reception methods: user computer, control alarm, PLC, DCS, mobile phone, tablet computer, etc. 7. With status indication function, it comes with 4 sets of LED status indicators. 8. With overvoltage protection, lightning protection, short circuit protection, reverse connection protection, anti-static interference, anti-magnetic field interference and other functions, and with automatic recovery function. 9. With Temperature Humidity detection function, it can detect the temperature Humidity value of gas in the field or pipeline (optional). 10. Full software Automatic calibration, Sensor up to 6 target point Adjustment, ensure the accuracy and linearity of measurement, and have data recovery function. 11. Full Chinese/English operation menu, simple and practical, with temperature compensation function. 12. Optional infrared remote control can be used to remotely operate the instrument without opening the lid.

Principle

The detector adopts imported electrochemistry gas Sensor to detect CO gas in the environment by diffusion, flow or pump-suction Sampling method. The Sensor converts the gas concentration signal into an electrical signal, which is processed by microcontroller technology to achieve Fast Response and High Accuracy measurement, and displays the concentration value and status information on the 2.4-inch industrial-grade color screen.

Applications

It is suitable for a variety of environments that require CO gas concentration detection and analysis.

Standards

GB3836.1-2010 "Explosive environments - Part 1: Equipment - General requirements", GB3836.2-2010 "Explosive environments - Part 2: Equipment protected by flameproof enclosures" d "

Steps

Notice

• Operating voltage within 12~ 30VDC range. • Please pay attention to the applicable environment of explosion-proof mark (ExdII CT6) and Protection Rating (IP66) when installing. • Ambient Temperature should be between -30~ 55 ℃, Humidity should be ≤ 95% RH and no condensation. • Operating Pressure should be kept within the range of 86~ 120Kpa. • The instrument has a variety of protective functions, but it is still necessary to avoid strong impacts or improper operation caused by human or uncontrollable factors. • Sensor calibrating, follow the operating instructions to ensure Measurement accuracy. • Optional functions (such as Temperature Humidity Detection, GPRS Module, Video Transmission, etc.) need to confirm the configuration before connecting and using. • Relay output is passive contact point, please pay attention to its capacity when connecting external devices (220VAC 3A/24VDC 3A).