Overview
TBJ-GDHO-GCXB Automatic Film Applicator is a small Spreader test equipment with imported accessories, which has won the favor of multinational R & D institutions, universities and scientific research institutions at home and abroad at a good price. The equipment ensures the uniform and smooth application effect of Spreader by controlling the speed and stable pressure of the Spreader, solves the problem of artificial film inconsistency, and significantly improves the film reproducibility. It is suitable for Spreader accurate wet-film on different substrates.
Features
1. Using imported accessories, the price is good and cheap; 2. Spreader speed and pressure controllable to ensure uniformity and smoothness; 3. Improve film reproducibility and reduce manual differences; 4. Spreader methods are diverse, including wire rods and scrapers; 5. Spreader parameters are accurate, such as Spreader rate 5~ 200mm/s, high accuracy; 6. Optional accessories are rich and support customized functions; 7. The substrate is fixed with vacuum adsorption, stable operation; 8. Control mode is touch screen, easy to operate.
Principle
Automatic Film Applicator achieves accurate Spreader by controlling the speed of the Spreader and the steady pressure applied to the film applicator. The device uses the wire rod and scraper Spreader method to fix the substrate by vacuum adsorption to ensure uniformity and conformity during the Spreader process, thereby overcoming the artificial film Stability and improving film mass.
Applications
Multinational enterprise R & D institutions, domestic and foreign universities, scientific research institutions
Steps
1. Prepare the substrate and place it in the vacuum adsorption area; 2. Set Spreader parameters such as speed, stroke and Film thickness through the touch screen; 3. Select the Spreader method (wire rod or scraper); 4. Start the device for automatic Spreader; 5. Check the film mass after completion.
Notice
• Ensure that the power supply is 220V 50HZ; • Check whether the vacuum adsorption is firm before Spreader; • Adjust the Spreader parameters according to the substrate Film thickness; • Follow the instructions when using Optional accessories; • Customized functions need to be confirmed in advance; • Avoid over-temperature operation, the heating temperature does not exceed 180 ° C.
