Overview
RONGHUA INSTRUMENT HDM-500C Digital Temperature Control Electric Mantle is a laboratory liquid heating equipment. It adopts high temperature resistant and alkali-free fiberglass insulation material, and the resistance wire sealing is woven into a hemispherical inner heating heater in the insulating layer. It has the advantages of large heating area, fast heating, good thermal insulation effect, no open flame, and not easy to bruise Glass utensils. It is suitable for laboratories in colleges and universities, petroleum, chemical industry, environmental protection and other industries.
Features
1. Digital display intelligent temperature control design, with two Sensors for temperature measurement.
2. The built-in Sensor can measure the plate surface temperature, and the external Sensor can measure the material temperature.
3. Large heating area, fast heating and good thermal insulation effect.
4. No open flame, not easy to hurt Glass ware.
5. Suitable for continuous operation mode.
Principle
Electric Mantle uses high temperature resistant and alkali-free fiberglass as insulation material, the resistance wire is sealed in the insulating layer, and then woven into a hemispherical inner heating heater, which realizes accurate temperature control through an intelligent temperature control system.
Applications
Colleges and universities, laboratories in petroleum, chemical, environmental protection and other industries
Steps
1. Use it to heat up slowly for the first time, and turn off the power after seeing white smoke.
2. After the smoke is scattered, power on and heat up, and repeat several times until it is powered on and smoke-free.
3. Built-in or external Sensor can be selected for temperature measurement when officially used.
Notice
• When using it for the first time, heat it up slowly and remove the smoke repeatedly.
• No flammable, explosive, corrosive liquids or gases can enter the Electric Mantle.
• Relative working environment humidity does not exceed 85%.
• The product must be grounded, dried and not damp during storage.
• If it is wet, pay attention to the induction electricity when using it, and do not touch it with your hands.
