Overview
RONGHUA INSTRUMENT RHDCY-36S water bath Nitrogen blowing instrument adopts purge and trap technology, which can heat the sample at controlled temperature, and use nitrogen and other inert gases to blow quickly, controllably and continuously to the surface of the sample to achieve rapid oxygen-free condensation of the sample solution. This method has the characteristics of time saving, convenience and accuracy.
Features
1. Process up to 36 samples
2.The size of the testtube is 16mm.
3. Nitrogen consumption 330ml/min/sample, adjustable
4. Gas flowmeter range 0~ 15L/min
5. Temperature control accuracy +/- 0.5 ℃
6. Temperature range Room temperature to 100 ℃
7. The temperature control method is digital display temperature control
8. Standard tuberack
Principle
The water bath Nitrogen blowing instrument adopts purge and trap technology, which heats the sample by temperature control, and uses nitrogen and other inert gases to quickly, controllably and continuously purge the surface of the sample, so that the sample solution can be rapidly condensed under no oxygen conditions.
Applications
Sample condensing, laboratory analysis
Standards
Laboratory Common Criteria
Steps
1. Place the sample testtube
Step 2 Set the heating temperature
3. Adjust nitrogen flow
4. Start the condensing process
5. Monitor condensing progress
Notice
• Check nitrogen supply before use
Make sure the testtube size matches
• Control the heating temperature within the allowable range
• Periodically calibrated gas flow meters
• Pay attention to safety protection during operation
