Overview
YIHENG LHS-500HC-I Laboratory Constant Temperature and Humidity Chamber (Professional) is a vertical device with 3550W input Power. The product uses mirror stainless steel liner and imported Compressor parts, Temperature range -5~ 80 ℃, Humidity Control Range is 40~ 85% RH.
Features
1. New fluoride-free design, environmentally friendly and healthy.
2. Mirror stainless steel liner, four corners and a half arc easy to clean, adjustable shelf spacing.
3. Microcomputer temperature Humidity controller, using TMHM equilibrate Conditioning method, stable operation, accurate temperature and humidity control and safe and reliable.
4. Humidity Sensor, Compressor and other key components are imported products.
5. It is equipped with an independent temperature limit alarm system, which automatically interrupts when the temperature exceeds the limit to ensure the safe operation of the experiment without accidents.
6. Can be equipped with a printer, which can record the change of temperature and Humidity parameters. (I type optional)
7. Can be equipped with RS485 interface, used to connect to printer or computer, can record the change of temperature and Humidity parameters. (optional)
8. There is a 25mm diameter test hole on the left side of the box, which is convenient for experimental operation and testing.
Principle
The device uses the TMHM equilibrate Conditioning method to operate through a microcomputer temperature Humidity controller to achieve accurate temperature Humidity control.
Applications
Spinning & weaving, Food processing and other aseptic tests, Stability inspection, Raw material performance testing of industrial products, Encasement testing, product life testing
Steps
1. Place the device in a position that meets the requirements of the working Ambient Temperature (5~ 35 ° C), and connect the AC220V 50HZ power supply.
2. Set the required temperature (-5~ 80 ° C) and Humidity (40~ 85% RH) parameters through the microcomputer temperature Humidity controller.
3. Adjust the spacing of the shelves in the box as needed and place the samples to be tested.
4. Start the equipment, the equipment will operate according to the set parameters, using the TMHM equilibrating Conditioning method for control.
5. During the experiment, it can be operated and tested through the test hole on the left side of the box.
6. After the experiment, turn off the power of the equipment, take out the sample, and clean the equipment liner.
Notice
● Equipment should be placed in a place with an Ambient Temperature of 5 to 35 ° C.
● Power supply voltage is AC220V 50HZ.
The equipment is equipped with an independent temperature limit alarm system, but the operator still needs to pay attention to the operation status.
● When cleaning the liner, please pay attention to the use of its four-corner half-arc design for easy cleaning.
● Printer, RS485 interface, LCD program controller, wireless alarm system (SMS alarm system) are Optional accessories, non-standard configuration.
