Overview
The Fluoride Reagent Kit is a TR-F model product under TONGAO, including Fluoride Reagents 1, 2, 3 and 4, which can be used directly as the finished Reagent. The Reagent is developed based on more than ten years of experimental data and has the characteristics of high Stability, high Accuracy and wide Measurement range. It is universal for STIP-scan of all fluoride parameters under Tongao.
Features
1. Reagent, can be used directly, easy to operate.
2. Based on more than ten years of experimental data, it is scientifically reliable.
3. High Stability and Accuracy.
4. Measurement range, strong applicability.
5. Common to STIP-scan of all fluoride parameters under Tongao.
Principle
The Reagent set through a specific chemical Reagent (Fluoride Reagent I, II, III, IV) and fluoride ions in the water sample color reaction, the depth of the solution after the reaction is proportional to the concentration of fluoride ions, and then through the matching STIP-scan photometric determination, so as to quantitatively analyze the fluoride content in the water sample.
Applications
Water quality testing, environment monitoring, laboratory analysis
Standards
No information yet
Steps
1. Prepare the water sample to be tested and the Tongao water quality analyzer.
2. According to the requirements of the instrument and Reagent manual, add an appropriate amount of water sample and fluoride Reagent 1, 2, 3 and 4 in sequence.
3. Wait for the reaction to be complete (refer to the manual for the specific time).
4. Put the sample after the reaction into the water quality analyzer for measurement.
5. Read and record the fluoride concentration value displayed by the instrument.
Notice
• Reagent is a finished product, do not prepare or mix Miscellaneous chemicals.
• Reagents need to be stored in a cold and dark place to avoid light and high temperature.
• Please use within the valid period, do not use the expired Reagent.
• Please wear appropriate personal protective equipment when operating.
• Please read the relevant instructions of the instrument and Reagent carefully before use.
• Waste liquid should be handled in accordance with laboratory safety regulations.
