Overview
HUITAI LHS-100SC + embedded printer Constant Temperature and Humidity Chamber, volume is 100L, Temperature range is 0~ 60 ℃. The product adopts large-screen LCD display, mirror stainless steel liner and double-decked door structure, which has good thermal insulation effect. Its temperature control adopts PID method, which controls temperature and humidity accurately and has small fluctuations.
Features
1. Humanized design: large screen LCD display, menu operation interface; use environmentally friendly without fluorine refrigerant; mirror stainless steel liner, easy to clean, adjustable shelf spacing; double-decked door structure, good thermal insulation performance; optional test hole and box door observation window.
2, quality assurance: using brand Compressor and self-developed cooling system; JAKEL circulating fan and unique air duct to ensure temperature uniformity; using international good brand humidity Sensor and built-in water tank electric heating tube humidification system to effectively ensure humidity deviation; PID control, temperature control and humidity accurate; with 99 cycles, 30 cycles per cycle of complex program operation ability.
3. Optional independent temperature limit alarm system: automatic interruption and sound and light alarm when the temperature exceeds the limit.
4. Optional and convenient data processing: with USB or RS485 interface, you can connect a printer or computer to record data.
5. Standard embedded printer.
Principle
The Constant Temperature and Humidity Chamber circulates air through the Compressor cooling system, circulating fan and air duct structure, and precisely adjusts the temperature with the PID controller. Humidity is controlled by the built-in water tank electric heating tube humidification system and humidity Sensor to achieve stable environment simulation conditions.
Applications
Spinning & weaving, Food processing and other aseptic tests, Stability inspection, Raw material performance testing of industrial products, Product Encasement testing, Product life testing, Industrial research, Biotechnology testing
Steps
1. Connect the AC220V 50HZ power supply.
2. Set the required temperature, humidity and program parameters through the large-screen LCD menu operation interface.
3. Adjust the shelf spacing and place samples as needed.
4. Start the device running.
5. The experimental situation can be observed through the observation window or test hole (optional function).
6. After the experiment is over, stop running according to the instructions on the operation interface.
7. Optional connection to a printer or computer for data recording and processing.
Notice
● The performance parameter test is carried out under the conditions of no load, no strong magnetic field, no vibration, environment temperature 20 ℃ and environment humidity 50% RH.
When the temperature limit is exceeded, the optional independent temperature limit alarm system will start, so pay attention to the alarm prompt.
● Power supply voltage is AC220V 50HZ before use.
● The test hole on the left side of the box, the observation window of the box door, the independent temperature limit controller, and the RS485 interface are optional functions, please operate according to the actual configuration.
● Non-standard volume products can be customized according to user requests.
