Overview
HUITAI LHS-100HC humidity chamber is a precision environment simulation device with a volume of 100L and an input power of 1100W. It uses a large-screen LCD display and mirrored stainless steel liner. Temperature range is -5~ 80 ° C. PID control enables accurate temperature and humidity regulation, with small fluctuations, and is equipped with a double-decked door structure to enhance heat insulation.
Features
1. Humanized design: large screen LCD display, menu operation interface; environmentally friendly without fluorine refrigerant; mirror stainless steel liner, four corners and half arcs are easy to clean, shelf spacing is adjustable; double-decked door structure is well insulated; optional test hole and box door observation window.
2. Quality assurance: brand Compressor and self-developed cooling system are used; JAKEL circulating fan and unique air duct ensure temperature uniformity; international brand humidity Sensor and built-in water tank electric heating tube humidification system ensure humidity accuracy; PID Control mode; complex program setting for 99 cycles and 30 segments per cycle.
3. Safety and data processing: Optional independent temperature limit alarm system, automatic interruption and alarm over temperature; standard RS485 interface, can be connected to printer or computer to record data.
Principle
Through the Compressor cooling system and the electric heating pipe humidification system, combined with the PID control algorithm, the equipment precisely adjusts the environment in the box. The circulating fan and the unique air duct structure promote the uniform circulation of air to ensure the consistent distribution of temperature and humidity, so as to simulate the required stability testing conditions.
Applications
Spinning & weaving, Food processing and other aseptic tests, Stability inspection, Raw material performance testing of industrial products, Product Encasement testing, Product life testing, Industrial research, Biotechnology testing
Steps
1. Connect the AC220V 50HZ power supply.
2. Set the required temperature, humidity and program cycle through the large-screen LCD menu interface.
3. Place the sample and adjust the shelf spacing in the box.
4. Start the device running.
5. Data can be monitored and recorded by connecting a computer or printer through the RS485 interface.
6. After the experiment is completed, shut down the equipment according to the procedures.
Notice
● The performance parameter test is carried out under the conditions of no load, no strong magnetic field, no vibration, environment temperature 20 ℃ and humidity 50% RH.
● Optional accessories (such as independent temperature limit controller, test hole, observation window, etc.) should be selected according to actual needs.
When the temperature limit is exceeded, the optional independent temperature limit alarm system will be activated, requiring timely treatment.
● Non-standard volume (such as 1000L) products can be customized according to user requests.
