Overview
TWG-5080L high temperature drying oven can realize drying, baking, sintering, curing, heat treatment, heat preservation and high temperature test. Temperature range can reach RT + 10~ 500 ℃, long-term use temperature is 480 ℃, suitable for a variety of high temperature treatment scenarios.
Features
1. Can perform high temperature heat resistance testing and heat treatment at 400 ° C/500 ° C/600 ° C and below.
2. Intelligent microcomputer integrated temperature control system, with PID logic operation function.
3. Color LCD screen digital display, with setting temperature, thermostatic, timing, self-tuning, over-temperature alarm and other functions.
4. With call recovery function, with Sensor boot self-diagnosis, over-temperature alarm function.
5.The liner is made of 304 stainless steel, with circular arc design, easy to clean.
6 heating components using 304 stainless steel heating tube.
7. Inverted enough door lock, automatic lock when closing the door, easy to open and good sealing.
8. 4 casters are given as a gift, which is convenient for product movement and has a locking switch.
9. In terms of safety, it has over-rise alarm and menu locking functions.
Principle
The high temperature drying oven adopts the convection mode of forced hot air circulation, and performs PID logic operation through the intelligent microcomputer integrated temperature control system to precisely control the Heating power of the stainless steel heating pipe to realize the rapid, uniform rise and stability of the temperature in the box. The system monitors the temperature in real time through the K-type temperature sensor and displays and controls it through the color LCD screen.
Applications
Drying, baking, sintering, curing, heat treatment, heat preservation, high temperature test
Steps
1. Connect the 220V power supply.
2. Set the required temperature, thermostatic time and other parameters through the color LCD screen.
3. Start the device, the device will run according to the set program, including heating, thermostatic, timing, etc.
4. After the operation is completed, the device can automatically stop or enter a standby state.
Notice
• The equipment has over-temperature alarm function, please pay attention to the alarm prompt during operation.
• Power supply voltage meets 220V requirement before use.
• The maximum load of a single shelf is 10kg, do not overload.
• When the equipment is running, do not open the box door frequently, so as not to affect the Temperature uniformity and experimental effect.
• The equipment is equipped with an exhaust port, please ensure that it is well ventilated.
• When moving the device, use casters and pay attention to locking.
• When cleaning the liner, make use of its rounded corner design for easy cleaning.
