Overview
TWG-4225L high temperature drying oven can realize drying, baking, sintering, curing, heat treatment, heat preservation and high temperature test. Its long-term use temperature can reach 380 ℃, Temperature range is RT + 10~ 400 ℃.
Features
1. Can perform high temperature heat resistance testing and heat treatment at 400 ° C/500 ° C/600 ° C and below.
2. Intelligent microcomputer integrated temperature control system, with PID logic operation function.
3. Color LCD screen digital display, with setting temperature, thermostatic, timing, self-tuning, over-temperature alarm and other functions.
4. With call recovery function, Sensor boot self-diagnosis and over-temperature alarm function.
5.The liner is made of 304 stainless steel, with circular arc design, easy to clean.
6 heating components using 304 stainless steel heating tube.
7. Inverted enough door lock, automatic lock when closing the door, easy to open and good sealing.
8. Complimentary 4 casters with locking switch for easy movement.
9. Equipped with safety functions such as over-rise alarm and menu lock.
Principle
The device adopts convection mode of forced hot air circulation, heating through stainless steel heating pipe, PID logic operation by intelligent microcomputer integrated temperature control system, precise control of the temperature in the box, to achieve uniform and stable high temperature environment.
Applications
Drying, baking, sintering, curing, heat treatment, heat preservation, high temperature test
Steps
1. Turn on the power supply.
2. Set the required temperature, time and other parameters through the color LCD screen.
3. Start the equipment and the heating system starts to work.
4. After the equipment runs to the set time, it can automatically stop or enter the holding state.
5. After the test, turn off the power.
Notice
• Power supply voltage is 220V before use.
• Load per shelf is 10kg, do not overload.
• When the equipment is running, do not open the box door frequently.
• Pay attention to the over-temperature alarm prompt to ensure safe operation.
• When moving the device, use casters and confirm the lock switch status.
