Overview
TWG-5225L high temperature drying oven can realize drying, baking, sintering, curing, heat treatment, heat preservation and high temperature test. Temperature range, long-term use temperature up to 480 ℃, suitable for a variety of high temperature treatment scenarios.
Features
1. Can perform high temperature heat resistance testing and heat treatment at 400 ° C/500 ° C/600 ° C and below.
2. Intelligent microcomputer integrated temperature control system, with PID logic operation function.
3. Color LCD screen digital display, with setting temperature, thermostatic, timing, self-tuning, over-temperature alarm and other functions.
4. With call recovery function, Sensor boot self-diagnosis and over-temperature alarm function.
5.The liner is made of 304 stainless steel, with circular arc design, easy to clean.
6 heating components using 304 stainless steel heating tube.
7. Inverted enough door lock, automatic lock when closing the door, easy to open and good sealing.
8. Complimentary 4 casters with locking switch for easy movement.
9. Equipped with safety functions such as over-rise alarm and menu lock.
Principle
The equipment adopts forced hot air circulation convection mode, through stainless steel heating pipe heating, PID logic operation is carried out by intelligent microcomputer integrated temperature control system, and the temperature in the box is accurately controlled to achieve a uniform and stable high temperature environment.
Applications
Drying, baking, sintering, curing, heat treatment, heat preservation, high temperature test
Steps
1. Connect the 380V power supply.
2. Set the target temperature, thermostatic time and other parameters through the color LCD screen.
3. You can choose a fixed-value operation or a timed operation mode.
4. The equipment starts, the heating system works, and enters the thermostatic or timing state after reaching the set conditions.
5. After the process is completed or an alarm is triggered, handle and shut down the equipment according to the procedures.
Notice
* Power supply voltage of the device is 380V, please make sure the power supply matches.
* Load per shelf is 10kg, do not overload.
* Note that the equipment exhaust port is located at the top.
* Please make sure the door lock is sealed before running.
* Note that the long-term operating temperature of the device is 480 ° C. Do not exceed this limit.
When moving the device, use casters and confirm the lock switch status.
