Overview
DK-98-ⅱ series Electrically-heated thermostatic water bath is suitable for laboratories of industrial and mining enterprises such as units, Universities & colleges, scientific research departments and chemical printing and dyeing. It is used for experimental operations such as distillation, condensing, drying, and thermostatic heating. This model is a single row four-hole design, using stainless steel Tank and Cold rolled steel plate box, with precise temperature control and convenient operation functions.
Features
1. The shell adopts good steel plate forming processing, surface electrostatic spraying process, which is sturdy and durable.
2, liner and cover made of good stainless steel plate, strong corrosion resistance.
3, the use of U-shaped heating pipe in water direct heating, rapid heating, heat loss is small.
4. Single digital display (DK-98-II) or intelligent temperature controller (DK-98-IIA), easy to operate and effective to use.
5. PID control (DK-98-IIA).
6. Convenient operation, support for fixed-value operation, regular operation, and automatic stop.
7. Dedicated function keys enable temperature setting.
8, auxiliary menu, achieve over-rise alarm, deviation correction, menu lock.
9. Linear dispersion diagram display function.
Principle
The Electrically-heated thermostatic water bath is heated directly in the water through a U-shaped stainless steel heating tube to heat up the liquid in the Tank. Temperature monitoring and control is carried out with a single digital or intelligent thermostat (depending on the model), and the set temperature is maintained through the PID algorithm (DK-98-IIA model) or the time proportional adjustment (DK-98-II model) to achieve thermostatic heating. The system has temperature display, setting and various operating modes to ensure the stability and accuracy of the experimental process.
Applications
Unit laboratories, Universities & colleges laboratories, laboratories of scientific research departments, laboratories of industrial and mining enterprises such as chemical printing and dyeing
Standards
The data did not mention specific compliance criteria.
Steps
1. Connect the power supply (AC220V/4.5A 50/60Hz).
2. Add an appropriate amount of liquid to the Tank.
3. Set the required temperature (RT + 5~ 100 ° C) and timing time (0~ 999 minutes, if applicable) by tapping the button.
4. Select the operation mode (fixed-value operation or regular operation).
5. Start the equipment, the heating tube starts to work, and the digital tube displays the real-time temperature.
6. After the experiment is completed, the device can be automatically stopped or manually shut down according to the setting.
Notice
• Before use, please confirm that the Power supply voltage is consistent with the equipment requirements (AC220V).
• Tank Shelf bearing no more than 5kg.
• The equipment has an over-lift alarm function, please pay attention to the alarm prompt.
• Operations such as deviation correction and menu locking can be performed through the auxiliary menu.
• Operating temperature range (RT + 5~ 100 ℃), do not exceed the limit.
• Regular maintenance to ensure that the equipment is clean and working properly.
