Overview
DK-98-ⅱ A (single row six holes) Electrically-heated thermostatic water bath is a TAISITE brand product, suitable for laboratories of Universities & colleges, scientific research departments and chemical printing and dyeing enterprises, used for distillation, condensing, drying, thermostatic heating and other experimental operations.
Features
1. The shell is formed with good steel plate, and the surface is electrostatic spraying process, which is sturdy and durable.
2, liner and cover made of good stainless steel plate, strong corrosion resistance.
3, the use of U-shaped heating pipe in water direct heating, rapid heating, heat loss is small.
4. Adopting an intelligent temperature controller makes it easy to operate and effective to use.
5. Adopt PID control.
6. Convenient operation, support for fixed-value operation, regular operation, and automatic stop.
7. Dedicated function keys enable temperature setting.
8, auxiliary menu, achieve over-rise alarm, deviation correction, menu lock.
9. Linear dispersion diagram shows that the time unit is minutes and the temperature unit is ℃.
Principle
The water bath is heated directly in the water through a stainless steel U-shaped heating tube to heat up the water in the Tank. Using intelligent temperature controller and PID control technology, the water temperature is monitored in real time through Sensor, and compared and adjusted with the set temperature to achieve accurate and stable thermostatic control.
Applications
Universities & colleges laboratories, laboratories of scientific research departments, laboratories of chemical enterprises, laboratories of printing and dyeing enterprises
Steps
1. Turn on the power supply (AC220V 50/60Hz).
2. Add an appropriate amount of water to the Tank.
3. Set the required temperature and timing time (0 to 999 minutes) by tapping the button.
4. Select the operation mode (fixed-value operation or regular operation).
5, start the equipment heating and thermostatic control.
6. After the experiment, the device can automatically stop and turn off the power.
Notice
• Power supply voltage is AC220V before use.
• Tank Shelf bearing no more than 5kg.
• The device has an over-lift alarm function, please pay attention to the alarm prompt.
• You can correct the deviation or lock the menu button through the auxiliary menu.
• The device supports power outage compensation and power outage memory functions.
• Please note that Temperature range is room temperature + 5 ° C to 100 ° C.
• Do not run beyond the maximum Power (1500W) of the device.
