Overview
DK-98-ⅱ A (double row four holes) Electrically-heated thermostatic water bath is suitable for laboratories of Universities & colleges, scientific research departments and chemical printing and dyeing enterprises. It is used for experimental operations such as distillation, condensing, drying, and thermostatic heating. The product adopts an intelligent temperature controller with PID control function, which is easy to operate and has good use effect.
Features
1. The shell is formed with good steel plate, and the surface is electrostatic spraying process, which is durable.
2, liner and cover made of good stainless steel plate, strong corrosion resistance.
3, the use of U-shaped heating pipe in water direct heating, rapid heating, heat loss is small.
4. Intelligent temperature controller (DK-98-IIA), easy to operate and effective to use.
5. PID control.
6. Convenient operation, fixed-value operation, regular operation, automatic stop.
7. Dedicated function keys enable temperature setting.
8, auxiliary menu, achieve over-rise alarm, deviation correction, menu lock.
9. Linear dispersion diagram of heating, time unit: minute, temperature unit: ℃.
Principle
Electrically-heated thermostatic water bath is directly heated in water through U-shaped stainless steel heating pipe to heat up the water in the Tank. The intelligent temperature controller (PID control) monitors the temperature in real time and maintains the set temperature by adjusting the Heating power to achieve thermostatic control. The system supports functions such as fixed-value operation, regular operation and automatic stop.
Applications
Universities & colleges, scientific research departments, chemical printing and dyeing and other industrial and mining enterprises
Steps
1. Turn on the power supply (AC220V).
2. Add an appropriate amount of water to the Tank.
3. Use the touch button to set the required temperature and timing time.
4. Select the operation mode (fixed-value operation or regular operation).
5, start the equipment, heating pipe to work.
6. The device will automatically control the temperature to the set value and stop automatically when the timing is over (if the timing is set).
7. After use, turn off the power, drain and clean.
Notice
• Power supply voltage meets requirements (AC220V) before use.
• Tank must add water before heating, dry burning is strictly prohibited.
• Shelf load-bearing no more than 5kg.
• The device has an over-lift alarm function, please pay attention to the alarm prompt.
• Operations such as deviation correction and menu locking can be performed through the auxiliary menu.
• The equipment has power outage compensation and memory functions, and can continue to operate after power is restored.
• Do not touch the heating area while the equipment is running to prevent burns.
• Regularly clean the liner and keep the equipment drying.
