Overview
YDX BC80 Thermometric Paper is a single-frame Thermometric Paper with Pressure sensitive adhesive. It belongs to the single-temperature multi-color series. Irreversible Thermometric Paper has only one temperature point of 80 ° C and the specification is 2x2cm/piece. After overheating, it will turn into red, black, green, yellow and other Colors, with a protective film on the surface. It is often used for temperature tracking of equipment in the railway industry.
Features
1. Single temperature point design, accurate measurement of 80 ℃ temperature
2. Irreversible discoloration, permanent display Color change after overheating
3. Multi-color display, can become red, black, green, yellow and other Colors
4. Pressure sensitive adhesive for easy installation
5. Protective film on the surface to protect Thermometric Paper
6. Uniform specifications, 2x2cm round design
Principle
YDX BC80 Thermometric Paper works based on the principle of thermal materials. When the temperature of the temperature measurement site reaches or exceeds 80 ° C, the thermal material in the Thermometric Paper undergoes irreversible chemical changes, permanently turning into red, black, green, yellow and other Colors, so as to visually display the overtemperature situation.
Applications
Railway industry equipment temperature tracking
Steps
1. The temperature measurement part to be pasted on the single-compartment Thermometric Paper should be kept flat, clean and drying, it is better to use sandpaper to remove the oxidation layer or concave and convex surface, or use gasoline and other suitable solvents to clean and wipe it again
2. Bend the BC80 Thermometric Paper first and then uncover it (if you are not very skilled at peeling it off, you can use a knife to shovel it from the side along the backing paper)
3. Pressure sensitive adhesive is attached to the surface of single-grid Thermometric Paper. When pasting, it should be pressed firmly to eliminate the tiny air gap between the adhesive surfaces, so that the adhesive surface can play a bonding role under pressure, and ensure that Thermometric Paper can be firmly glued to the temperature measurement part. Not easy to fall
4. If you want to stick it on the part that may be stained with oil or water, choose another Miscellaneous series temperature measuring patch with protective film
Notice
• The temperature measurement part must be kept flat, clean and drying
• It is recommended to use sandpaper to remove the oxidation layer or concave and convex surface
• The temperature measurement part can be cleaned with gasoline or other suitable solvents
• Press firmly when pasting to eliminate air gaps
• Miscellaneous series temperature measuring patches with protective film should be used on parts that may be stained with oil or water
• In particularly harsh places, it is recommended to wrap larger scotch tape, which can play a better role in protection and fixation
