Overview
HUDA QD-E706 dust test chamber is suitable for detecting the sealing performance of the product shell, mainly for the IP5X and IP6X tests specified in the shell protection class standard. The equipment is mainly used to simulate the damage caused by sandstorms to locks, auto and motorcycle parts, sealing parts, power meters and other products.
Features
1. The whole is made of stainless steel, and the interior is polished to reduce the adhesion of sand and dust.
2. The dust blower, dust vibration, and total test time can be controlled and set according to the test requirements.
3. Large tempered glass windows are equipped with sand and dust scrapers, allowing the test state to be observed at any time.
4. Adopt PLC dialog touch screen intelligent Operating system, with diverse functions and simpler operation.
5. Unique air duct design ensures that the box generates non-layered vertical circulation airflow.
6. The dust blower, dust vibration and test time can be individually set and adjusted as a whole.
7. Equipped with a vacuum system, Flow rate, Flow velocity and pressure difference can be displayed and controlled in real time.
8. Power supply, short circuit, grounding, over-temperature and other protection devices will automatically stop if the fault is abnormal, and an audio prompt will be issued.
Principle
Through the unique air duct design, the equipment generates non-layered vertical circulation airflow in the box to simulate the sand and dust environment. The equipped vacuum system can display and control the Flow rate, Flow velocity and pressure difference in real time, so as to test the sealing performance of the product shell.
Applications
Electrical, electronic, automotive, Motorcycle, LED and other products of the shell sealing performance test, dustproof products (such as lights, meters, steering systems, door locks, etc.) of the dust test.
Standards
GB2423、GB4706、GB4208、DIN
Steps
1. According to the test requirements, set the parameters of the dust blower, dust vibration and total test time through the PLC touch screen Operating system.
2. Place the sample to be tested in the test chamber.
3. Start the equipment and observe the test status in the box.
4. After the test, the device automatically stops and issues a prompt.
Notice
The equipment is equipped with power supply, short circuit, grounding, over-temperature and other protection devices, which will automatically stop and prompt when faulty, and the operator should deal with it in time.
• Before the test, make sure that the parameter settings such as tale powder dosage meet the requirements.
• When observing the test through a large tempered glass window, the equipped dust scraper can be used to maintain a clear field of vision.
