Please contact customer service
The equipment can perform IPX3 to IPX6 waterproof test, equipped with 400mm radius stainless steel pendulum pipe and independent IPX5/6 Nozzle, adjustable water pressure 80-150Kpa, accurate and controllable water spray Flow rate, to meet the needs of multi-standard testing.
Category : Rain Test Chamber
Brand : HUDA
SKU : NB041445
Service :The delivery and service By NBCLab.Com
HUDA rain test chamber (model: QD-E710-IPX3456-225) is mainly used to simulate the rain climate environment, test the storage, transportation and use performance of electronic and electrical equipment, lamps, electrical cabinets, electrical components, automobiles, Motorcycles and their parts under rain conditions. After the test, the verification of equipment performance meets the requirements, providing the basis for product design, improvement, verification and factory inspection.
1. It can perform multiple waterproof level tests such as IPX3, IPX4, IPX5, and IPX6. 2. The pendulum pipe is made of 304 stainless steel industrial pipe, and the nozzle is made of 304 stainless steel, which is resistant to corrosion. 3. The IPX56 nozzle is connected with a looper thread, making it easy to operate. 4. Flow rate can be set to meet different test standards. The size of the inner box is 500 * 600 * 750mm, and the Miscellaneous size can be customized according to requirements.
The device simulates natural rainfall or strong water spray environments through a precisely controlled swirl tube or nozzle system. For IPX3/IPX4 grades, swinging tubes are used to swing within a set angle to spray water on the sample at a specific Flow rate and pressure. For IPX5/IPX6 grades, a fixed aperture nozzle is used to spray the sample directly at a specified Flow rate and pressure. During the test, the sample stage can swirl/spin as specified to ensure that all surfaces of the sample are wet to inspect the waterproof performance of its shell.
Electronic and Electrical Equipment, Lamps, Electric Cabinets, Electrical Components, Automobiles, Motorcycles and Their Parts
GB2423,38-90、GB4706.32-2004、IEC-529
1. IPX3 test: Select a swinging tube with a radius of 400mm, place the sample on the stage, the top is not more than 200mm away from the water nozzle, and the stage does not swirl/spin. The swinging tube swings 60 ° along both sides of the vertical line, a total of 120 °, and each swing is about 4s. The water pressure is 80-150kPa, and the water is continuously sprayed for 10min. After 5min, the sample swirl/spin 90 °. 2. IPX4 test: Select a swinging tube with a radius of 400mm, place the sample on the stage, the top is not more than 200mm away from the water nozzle, and the stage does not swirl/spin. The swinging tube swings 180 ° along both sides of the vertical line, a total of about 360 °, and each swing is about 12s. Water pressure 80-150kPa, continuous watering for 10min, after 5min, the sample swirl/spin 90 °. 3. IPX5 test: use a 6.3mm nozzle, Flow rate 12.5L/M +/- 0.625L, the sample is 2.5-3 meters from the nozzle, and the injection time is usually 3 minutes (can be set). 4. IPX6 test: Use a 12.5mm nozzle, Flow rate 100L/M +/- 5L, the sample is 2.5-3 meters away from the nozzle, and the injection time is usually 3 minutes (can be set).
• Before testing, please confirm that the sample placement meets the standard requirements (such as the distance from the top to the nozzle during IPX3/4 testing is not more than 200mm). • When conducting IPX5/6 testing, the tester needs to control the distance between the nozzle and the sample (2.5-3 meters). • Please select the correct pendulum pipe, nozzle and set the corresponding water Flow rate, pressure, swing angle and speed according to the test level. • Equipment power supply is 380V, Power 12KW, please pay attention to power safety when operating. • During the test, please ensure that the water supply pressure is within the range of 80-150Kpa. After the test is completed, please clean and maintain the equipment as required.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
