$ 6861.00Ex works
Temperature range -60~ 150 ℃, Humidity range 20~ 98% RH, with 1000 segment program capacity and automatic calculation function, support PC link and reservation start, to meet the needs of complex environment simulation.
Category : Temperature Humidity Chamber
Brand : kesionots
SKU : NB041519
Service :The delivery and service By NBCLab.Com
KESIONOTS KS-HW408F (150 ℃) humidity chamber is a device that can accurately simulate complex natural environments such as low temperature, high temperature, high temperature and high humidity, low temperature and low humidity. It is suitable for product Reliability testing in plastics, electronics, food, clothing, vehicles, metals, chemicals, building materials and other industries. The equipment adopts advanced refrigeration, heating and temperature and humidity control systems to ensure Stability and accuracy of test conditions.
1. With automatic calculation function 2. With fixed temperature and slope setting function 3. With hold, skip, standby and two sets of time signal output functions 4. With cold/heat engine start-up selection function 5. With temperature display value correction function 6. With temperature sensor calibration function 7. With Compressor automatic stop function 8. With reservation start/stop function 9. With power failure memory function, the program data memory can be maintained for 6 months after power failure 10. Powerful network monitoring and control capabilities 11. With a capacity of 1000 programs, each segment can cycle 999 steps, and the MAX Maximum is set to 99 hours and 59 minutes per segment 12. With fault alarm and cause, processing prompt function 13. With upper and lower limit temperature protection function 14. With self-diagnostic function 15. With PC link function
The humidity chamber adopts a cascade refrigeration system, which consists of high temperature part and low temperature part, which are connected by evaporative condenser to realize low temperature refrigeration. The heating system is composed of high power resistance wire to ensure rapid heating. The temperature and humidity system includes steam humidification and mechanical refrigeration dehumidification or drying dehumidification. The temperature and humidity parameters are precisely monitored and controlled by Sensor.
Plastics, electronics, food, clothing, vehicles, metals, chemicals, building materials
GB5170、2、3、5、6-95、GB2423.1-89 (IEC68-2-1)、GB2423.2-89 (IEC68-2-2)、GB/T2423.3-93(IEC68-2-3)、GB/T423.4-93(IEC68-2-30)、GJB150.3(ML-STD0-810D)、GJB150.4(MIL-STD-810D)、GJB150.9-1986、GJB4.6-1983、GJB367.2-1987、GJB4.5-1983、GB10592-93、GB10586-93、GJB360.8-87(MIL-STD-202f)、GB/T5170.2-96、GB/T5170.5-96、YD1268-2003、UL1642、UN38.3、GB/T18287-2000、GB8897.4-2002、UL2054-2005、SJ/T 11169-1998、GB8897.4-2002、SJ/T11170-1998、YD1268.2-2003、QC/T743-2006、QC/T744-2006
1. Set the reservation boot operation function 2. Select the operation mode: fixed value/program/link 3. Set program data, including temperature, humidity, time and other parameters 4. Start the test and monitor the actual operation Linear dispersion 5. After the test is completed, check the fault history data
• Operation lock function prevents accidental touch from affecting experimental results • Select the appropriate restart mode (interrupt, cold start, or hot start) when a power outage returns • The safety detection device ensures the safe operation of the machine, and automatically cuts off the control power when it is abnormal • External protection device is independent of the controller, providing additional over-temperature protection • The humidification system adopts box water supply, and 20L of water needs to be manually added each time. • The weight of the product rack does not exceed 20 kg • Use air switch (40A), prohibit the use of knife switch or power socket • The resistivity of humidification water needs to be ≥ 500MΩ
Recommend a constant temperature and humidity test chamber with an inner volume of approximately 400 liters. It can accurately simulate high temperatures up to 150°C and a wide humidity range from 20% to 98%, making it suitable for high-temperature and high-humidity reliability testing of products such as lithium batteries and electronic components. This equipment offers high precision in temperature and humidity control, along with a large program capacity, effectively meeting the requirements of relevant testing standards.
Yes. For testing automotive components and other products requiring complex environmental simulation, we recommend selecting a constant temperature and humidity chamber with powerful program control capabilities. It supports the free linking and cycling of multiple program segments, with each segment allowing for slope variation settings. This enables easy configuration of the required temperature and humidity alternating curves, simulating real-world day-night or seasonal cycle conditions to ensure testing accuracy and reliability.
