Overview
BENTING SC-250ML Magnetic Stirring Electric Mantle is a professional equipment for laboratory liquid stirring and heating. It uses high temperature resistant and alkali-free fiberglass insulation material parcel nickel-chromium resistance wire, woven into a hemispherical inner heating heater, with the bottom motor to drive the stirrer, with large heating area, fast heating, good thermal insulation effect, no open flame, not easy to bruise Glass utensils and large stirring torque. It is an ideal heating and stirring tool for laboratories and fine chemical units in colleges and universities, petroleum, chemical industry, environmental protection and other industries.
Features
1. The shell is formed by good cold plate processing, and the surface is treated by lame plating process.
2. It has the advantages of large heating area, fast heating, good thermal insulation effect, no open flame, not easy to scratch Glass utensils, and large stirring torque.
3. Intelligent instrument control, with dual screen display, can independently control temperature and Rotation speed.
4, Built-in dual Sensor, can be measured core temperature and liquid temperature, easy to operate.
5. The speed control system adopts imported brushless motor, which has the advantages of large torque, long service life and no noise.
Principle
The device generates heat through a resistance wire sealed with a high temperature insulating material to form a hemispherical internal heating heater to heat the container. At the same time, the bottom motor drives the magnetic stirrer swirl/spin inside the flask to realize the stirring of the liquid. The smart meter monitors the temperature of the heating sleeve core and the temperature of the liquid through dual Sensors, and independently controls the Heating power and the motor Rotation speed to achieve accurate temperature control and stirring.
Applications
Laboratories of colleges and universities, petroleum industry laboratories, chemical industry laboratories, environmental protection industry laboratories, and fine chemical units
Steps
1. Place the device on a stable countertop and connect it to the power supply.
2. Put the flask with liquid and stirrer into the Electric Mantle.
3. Turn on the power switch.
4. Set the required heating temperature and stirring Rotation speed through the smart meter.
5. The equipment starts to work, and the dual screens display the set value and the actual Measured value (core temperature and liquid temperature) respectively.
6. After use, turn off the power supply and take out the flask after the equipment is chilled down.
Notice
• Make sure the equipment is placed on a smooth, ventilated countertop for use.
• Before connecting the power supply, please confirm that the Power supply voltage is 220V 50HZ, which is consistent with the equipment requirements.
• Be careful when placing the flask to avoid violent collision with the inner wall of the heating sleeve.
• When the equipment is working and just stops working, the heating sleeve temperature is very high, do not touch it directly with your hands to prevent burns.
• Do not cover items on the device to avoid affecting heat dissipation.
• After use, the power should be turned off first, and the equipment should be completely cooled down before cleaning or storing.
• Please disconnect the power supply when cleaning, wipe it with a dry cloth, and do not rinse it directly with water.
• Do not use over capacity (250ml) or over temperature (380 ° C).
• If the equipment is abnormal, it should be stopped immediately and a professional should be contacted for maintenance.
