Overview
GMP-500 intelligent light chamber is a microcomputer-controlled thermostatic, constant humidity, light experiment foster device. It is widely used in microbial tissue cell fostering, seed germination, seedling test, plant cultivation and insect, small animal feeding, etc. It can accurately simulate different environment climate conditions and is an ideal equipment for R & D institutions to engage in production and scientific research.
Features
1. Using microcomputer to control temperature and Humidity, the control is stable and accurate.
2. Humanized touch buttons, large-screen LCD display, intelligent program control temperature, Humidity, lighting, menu operation, multiple parameters are displayed on the same screen.
3. Mirror stainless steel liner, four corners and half arc design, easy to disinfect and clean the studio, Shelf can be adjusted arbitrarily.
4. 30-segment program can be set to simulate the temperature, Humidity and light changes of nature during the day and night, and can also simulate the multi-directional Illuminant of nature. With setting parameters and automatic storage function of power failure.
5. Equipped with a variety of LED Illuminants suitable for plant growth, with no thermal interference, energy saving and environmental protection, stability, long life, high photoelectric conversion efficiency. Optional overhead flat lighting.
6. A suitable air duct circulation system ensures that the wind inside the studio is evenly distributed and does not blow to plant seedlings.
7. Key components such as Compressor and circulating fan are brand products.
8. Optional independent temperature limit alarm system, which can be automatically interrupted if the temperature exceeds the limit.
9. Upgraded (E series) with large screen color screen display, Illumrination degree using Light Sensor automatic detection and control, optional SMS alarm system.
10. Upgraded intelligent programmable lighting chamber, more innovative appearance, more accurate temperature control, Illumrination degree, more perfect protection, and optional RS-485 interface, connecting printers and computers.
Principle
The light chamber precisely regulates the temperature, Humidity and light intensity in the box through a microcomputer Control system. The system can be programmed to simulate changes in the natural environment, provide specific Light spectrum light through LED Illuminant, and ensure the uniform and stable environment in the box through the air duct circulation system, creating ideal conditions for biological fostering.
Applications
Microbial tissue cell fostering, seed germination, seedling test, plant cultivation, insects, small animal feeding, R & D institutions, colleges, laboratories, environment protection, agriculture, forestry and animal husbandry
Steps
1. Turn on the power supply.
2. Perform menu operation through touch buttons and large-screen LCD display to set the required temperature, Humidity, light intensity and time program.
3. Up to 30 programs can be set, each with a set time range of 1-9999 minutes, to simulate day and night changes.
4. Place the sample to be fostered and adjust the Shelf position as needed.
5. Start the equipment and start the foster process.
6. During operation, various parameters can be observed through the screen.
7. After the foster is over, take out the sample and clean the equipment.
Notice
The Ambient Temperature of the equipment is recommended to be between 5 and 35 degrees Celsius.
Please confirm that the Power supply voltage is 220V 50Hz before use.
Do not set the temperature below 5 ° C in no-light mode, or below 10 ° C in light mode.
When cleaning the liner, please pay attention to the use of its four-corner and half-arc design, which is convenient for thorough disinfection and cleaning.
If the temperature limit alarm system is selected, please ensure that its function is normal to ensure the safety of the experiment.
For upgraded equipment, if the SMS alarm function is selected, it is necessary to ensure that the signal reception is normal.
When the device is running, do not open and close the door frequently, so as not to affect the internal environment Stability.
Key components such as Compressors and fans are brand products, and non-professionals should not disassemble and repair them by themselves.
