Overview
LC-JY88-IIN Touch Screen Ultrasonic Cell crushing Instrument is composed of a host and a sound insulation box. It is a fully functional instrument with novel Appearance and reliable performance. It adopts a large-screen LCD Touchscreen display and is centrally controlled by a central microcomputer. It can arbitrarily set ultrasonic output, gap time, ultrasonic Power, duty cycle and temperature, and has functions such as sample temperature detection display, Frequency automatic tracking and automatic fault alarm.
Features
1. With 4.3-inch Touchscreen, parameters such as horn, Power ratio, ultrasonic time, ultrasonic interval time, etc. are intuitive and adjustable.
2. Using pulsed ultrasonic technology, good temperature control performance.
3. The sound insulation box adopts wave peak sound-absorbing sponge, which has good sound insulation effect.
4. Removable large acrylic window, easy to clean and observe.
5. Frequency automatic tracking, automatic fault alarm function.
6. Maximum support for 20 sets of program storage, easy to operate.
7. Lifting sample stage, suitable for a variety of containers.
8. Program automatic error correction, with overload and overtemperature protection display.
Principle
The instrument generates 20-25KHz ultrasonic waves through a central microcomputer Control system, which drives the transducer and automatically tracks Frequency. The ultrasonic waves are transmitted to the sample through the horn, and the cavitation effect is used to crush cells or disperse particles. The instrument uses a pulsed Operating Mode to achieve precise management of the Sample Handling process by setting the duty cycle, Power and operating/gap time, combined with temperature detection and control.
Applications
Cell crushing, sample dispersion, emulsification, homogenization, extraction, accelerated chemical reaction
Steps
1. Connect the power supply and turn on the power switch of the instrument.
2. According to the sample capacity and characteristics, select the appropriate horn and install it.
3. Place the sample in a suitable container that can lift the sample stage.
4. Set parameters such as ultrasonic Power, duty cycle, Working time, gap time, total timing and target temperature through 4.3 inch Touchscreen.
5. You can choose to save the current parameters as a program (up to 20 groups) for subsequent calls.
6. After confirming that the parameters are correct, start ultrasonic treatment.
7. During processing, the sample status can be observed through a large window, and the instrument will display the real-time temperature and perform over-temperature protection.
8. After processing, turn off the power, remove and clean the horn and sample container.
Notice
• Please ensure that the power supply is AC220V +/- 5%, 50Hz before use.
• Please select the corresponding horn according to the sample capacity (0.1-300 ml), the standard is 6mm horn.
• Ultrasonic Power can be adjusted in the range of 2.5-250 W, please select the appropriate Power according to the characteristics of the sample.
• Note that the set sample Temperature range is 0-100 ° C, and the temperature control accuracy is +/- 1 ° C.
• Timer Range is up to 99 hours, 59 minutes and 59 seconds, and the work/gap time is adjustable between 0.1-99 seconds.
• Please ensure that the soundproof box door is closed during operation to achieve good sound insulation.
• The instrument has overload, over-temperature protection and fault alarm functions. Please check and troubleshoot in time when an alarm occurs.
• When cleaning, removable acrylic window for cleaning.
• Do not touch the tip of the horn while the instrument is running to avoid burns or damage.
