Overview
JIANGKAI NBC-LL-50KG Universal Testing Machine is a device for testing the mechanical properties of various materials. It can perform tensile, compression, shear, adhesion, disbonding, tearing and other tests on rubber, plastic, leather, metal, nylon thread, fabric, paper and aviation, Encasement, construction, petrochemical, electrical, vehicle and other materials.
Features
1. The box is treated with electrostatic paint. The whole machine is designed rationally, the structure is tight, and the operation is safe, stable, and accurate. The whole machine is beautiful and elegant.
2, the use of precision screw structure, with good Stability, wide range of applications, easy to use and other advantages.
Principle
The device drives the precision screw rod through the AC speed control motor, which drives the fixture to move at the set speed (adjustable from 50-300mm/min), so as to apply tensile or compressive forces to the sample. The force value is measured and displayed by the digital display Force Gauge, and the system has functions such as current and voltage overload protection and limit stop to ensure the safety and stability of the test process.
Applications
Rubber, Plastic, Leather, Metal, Nylon Thread, Fabric, Paper, Aviation, Encasement, Construction, Petrochemical, Electrician, Vehicle
Standards
The data did not mention specific compliance criteria.
Steps
1. Connect the AC 220V 50HZ power supply.
2. Install the appropriate fixture according to the test requirements (standard is a set of tensile fixtures).
3. Set the required test speed through the knob.
4. Place the specimen in the fixture and clamp it.
5. Start the test by selecting functions such as up, down, stop or automatic through the control panel.
6. During the test, the digital Force Gauge displays the force value in real time.
7. The test stops automatically when the set conditions or limits are reached.
Notice
Before use, make sure the power supply is AC 220V 50HZ and check whether the equipment is well grounded.
• When installing the sample, make sure that the fixture is firmly clamped to prevent the sample from slipping.
• Do not exceed the Maximum Force Measurement range (50KG) of the device.
• During operation, please pay attention to observe the status of the equipment to avoid exceeding the effective stroke (350mm, excluding the fixture).
The equipment has overload protection and limit stop function, but the operator still needs to pay attention to safety.
• Non-professionals should not disassemble or modify the internal structure of the equipment.
• Maintain and inspect equipment regularly to ensure accuracy and Stability.
