Please contact customer service
160 × 120 high Sensitivity oxidation vanadium uncooled Detector, temperature range covering -20 ℃ to 350 ℃, support center point, highest temperature, lowest temperature and custom point temperature measurement, with 3D noise reduction and image detail enhancement function, the body is lightweight and portable.
Category : Infrared Thermal Imager
Brand : HIKMICRO
SKU : NB042285
Service :The delivery and service By NBCLab.Com
The HIKMICRO HM-TPH11-3AXF Handheld Thermal Imager is a Portable non-contact temperature measuring device. It uses a high-Sensitivity oxidation vanadium uncooled detector with 160 × 120 original resolution and a temperature measurement range of -20 ° C to 350 ° C. It is suitable for a variety of industrial inspection, equipment maintenance and safety screening scenarios.
Sensitivity oxidation vanadium uncooled detector, original resolution 160 × 120. 2. Support timed temperature shutter correction, 3D noise reduction, and image detail enhancement. 3. Provide white hot, black hot, iron red, rainbow 4 false color mode adjustable. 4. With temperature abnormal alarm function, support center point, maximum temperature, minimum temperature measurement. 5. Temperature measurement range -20 ℃~ 350 ℃, accuracy +/- 2 ℃ or +/- 2% of the range (take MAX Maximum). 6. The standby time is greater than 8 hours, and the automatic shutdown power saving mode is supported. 7. The picture stores the full-screen temperature measurement information, and supports offline temperature measurement analysis with the client side. 8. The fuselage is light, the weight is less than 350 grams, and it has IP54 Protection Rating and 2 meters anti-drop ability.
The Thermal Imaging Camera receives infrared radiation in the 8-14 μm band emitted by the surface of the target object through its uncooled vanadium oxidation micro-amplitude calorimeter detector. The detector converts the received radiation signal into an electrical signal and processes it to generate a thermal imagery image. The system calculates the corresponding temperature value by analyzing the radiation intensity of each pixel point in the image, combining the built-in algorithm and calibrate parameters, and presents it in the form of a pseudo-color image and specific temperature data on the display screen.
Industrial equipment testing, electrical maintenance, building energy efficiency assessment, safety screening, scientific research experiments
Protection Rating IP54
1. Power on and wait for the device to initialize. 2. Set the temperature measurement unit (Celsius, Fahrenheit or Kelvin) and the false color mode of the image through the menu. 3. Aim the equipment at the target to be measured to ensure that the measurement distance is greater than 0.3 meters. 4. Observe the thermal imagery on the screen and the temperature reading of the temperature measurement point (center point, highest temperature, lowest temperature, etc.). 5. If you need to save, press the photo button, and the image and full-screen temperature measurement information will be stored in the built-in memory. 6. After use, you can set the automatic shutdown time or manual shutdown. 7. Charge through the Type-C interface, and use the client side to analyze the stored pictures offline.
• Temperature measurement accuracy is +/- 2 ° C or +/- 2% (MAX Maximum), please pay attention to the influence of environmental conditions when using. • The minimum measurement distance is 0.3 meters, please do not measure the temperature accurately below this distance. • Operating temperature of the equipment is -10 ℃~ 50 ℃, storage temperature is -20 ℃~ 60 ℃, please use and store within the specified range. • Equipment Protection Rating is IP54, which can be dust- and splash-proof, but not completely waterproof, do not immerse in liquids. • Working time of battery is more than 8 hours, it is recommended to shut down when not in use for a long time to save power. • Images support offline analysis and need to be used with dedicated client side software. • Please use the 5V Power Adapter and micro USB cable that comes with the device to charge.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
