Please contact customer service
Using 256 × 192 resolution oxidation vanadium Detector, temperature measurement accuracy of +/- 2 ℃ or +/- 2%, support center point, maximum temperature and other multi-point temperature measurement and offline analysis, standby time more than 8 hours.
Category : Infrared Thermal Imager
Brand : HIKMICRO
SKU : NB042289
Service :The delivery and service By NBCLab.Com
HIKMICRO HM-TPH21-3AXF Handheld Thermal Imager is a Portable temperature measuring device with a high Sensitivity oxidation vanadium uncooled detector. It has the original resolution 256 × 192 thermal imagery capability, the temperature measurement range covers -20 ℃ to 350 ℃, and supports a variety of temperature measurement modes and temperature abnormal alarm functions, suitable for a variety of industrial inspection scenarios.
Sensitivity oxidation vanadium uncooled detector, original resolution 256 × 192. 2. Support timing and temperature difference shutter correction to ensure the accuracy of temperature measurement. 3. With 3D noise reduction and image detail enhancement function, improve image mass. 4. Provide four false color modes adjustable for easy observation. 5. Support center point, highest temperature, lowest temperature and custom point temperature measurement, and have temperature abnormal alarm function. 6. Wide temperature measurement range (-20 ℃~ 350 ℃), high accuracy (+/- 2 ℃ or +/- 2% of the reading). 7. Long standby time (> 8 hours), support automatic shutdown power saving mode. 8. The picture stores the full-screen temperature measurement information, and supports offline temperature measurement analysis through the client side. 9. Equipped with a 3.2-inch LCD display, it supports laser indication and UVC projection functions. 10. Lightweight body (about 380g), Protection Rating IP54, with 2 meters anti-drop ability.
The Thermal Imaging Camera is based on an uncooled vanadium oxidation micro-amplitude calorimeter detector with a Response band of 8-14 μm. The detector receives the infrared radiation emitted by the target object, converts it into an electrical signal, and generates a thermal imagery image on the screen after processing. By analyzing the temperature data of each pixel point in the image, temperature measurement and abnormal alarm in point, area and other modes are realized.
Industrial equipment inspection, electrical safety inspection, building energy conservation inspection, HVAC fault investigation, scientific research experiment temperature measurement
Protection Rating IP54
1. Power on and wait for the device to initialize. 2. According to the measurement needs, select the temperature measurement rules (such as center point, maximum temperature, etc.) through the menu. 3. Aim at the target object and observe the thermal imagery through the screen. 4. The false color mode can be adjusted to optimize the viewing effect. 5. Trigger measurement, the device will display the temperature value of the selected temperature measurement point. 6. If you need to save, you can take a JPEG image with full-screen temperature measurement information. 7. After use, you can set the automatic shutdown time or manual shutdown.
* The minimum imagery and measurement distance of the device is 0.3 meters, please do not use it at a closer distance. * Temperature measurement accuracy is affected by factors such as Ambient Temperature, please use within the range of Operating temperature (-10 ℃~ 50 ℃) and Humidity (≤ 95%) described. * Do not expose the device to extreme environments beyond the storage temperature (-20 ° C to 60 ° C). * The device does not have a lighting function and only relies on thermal imagery in a completely dark environment. * The device does not support WIFI function, and the offline analysis of pictures needs to be carried out through a wired connection with a dedicated client side. * Please use the Type-C interface when charging, and the Charging time is usually less than 3 hours in a 25 ° C environment. Although it has a 2-meter drop resistance rating, it is still necessary to avoid severe impact or fall. Do not aim the laser pointer at the human eye, and comply with relevant safety regulations when using it.
[A] No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[A] First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[A] After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
