APKJ AP-HX-30B programmable Humidity Chamber high and low temperature alternating environment test

Name: APKJ AP-HX-30B programmable Humidity Chamber high and low temperature alternating environment test
Brand: Apkjgroup
SKU: NB042320
Price: 4057.0 USD
Availability: InStock

$ 4057.00Ex works

With 120 sets of program control capabilities, it supports a wide temperature range test from -20 ° C to + 150 ° C. It uses a multi-wing air supply system to ensure uniform distribution of temperature and humidity, and is equipped with complete safety protection devices to display fault status in real time.

Model

Get Quote

Category : Temperature Humidity Chamber

Brand : Apkjgroup

SKU : NB042320

Service :The delivery and service By NBCLab.Com

Overview

APKJ AP-HX-30B programmable humidity chamber mainly provides complex high and low temperature alternating test environment and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production and inspection. The equipment adopts 7-inch super touch AP-900 intelligent programmable temperature and humidity controller, supports 120 programs, each program has 100 segments, and has USB connection, RS232 communication and other functions.

Features

1. Adopt 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments 2. Remote control can be achieved by connecting to the computer through the LAN interface 3. The multi-wing blower has strong air circulation to ensure uniform distribution of temperature and humidity 4. Complete safety protection device, automatically displaying fault status and providing troubleshooting methods 5. Using original imported Compressors, including French Taikang and Japanese Hitachi brands 6. Studio volume 30L, Temperature range -20 ℃~ + 150 ℃, Moisture control range 20~ 98% R.H

Principle

The equipment is mainly composed of a combination of control panel, switchboard, thermal insulation compartment, blower, heater, humidifier and freezer. Through the strong air supply circulation of multi-wing blower, any dead angle is avoided, and the indoor temperature and humidity are evenly distributed. The refrigeration system adopts the original imported Compressor, and cooperates with finned tube heat exchanger, expansion valve and capillary tubing to achieve temperature control.

Applications

Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research

Standards

GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/TT2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012、MIL-STD883C

Steps

1. Ensure that there is no strong vibration around the equipment, the ground is flat and well ventilated 2. Check that there is no strong electromagnetic field around the equipment, and no flammable, explosive and corrosive substances 3. Configure the corresponding capacity air or power switch to provide AC220V power supply 4. Set programs and parameters through the controller 5. Start the equipment for testing 6. Power off the device after the test is completed

Notice

Prohibition of testing or storage of flammable, explosive or volatile matter specimens • Prohibition of testing or storage of samples of corrosive substances • Prohibition of testing or storage of biological samples • Prohibition of testing or storage of samples of strong electromagnetic emission sources • There should be no strong vibration around the equipment • The ground should be level and well ventilated • No strong electromagnetic field around the device • No flammable, explosive, corrosive substances and dust around the equipment • Appropriate use and maintenance space should be left around the equipment • power requirements: single-phase two-wire + protective ground wire, voltage AC (220 +/- 10) V, frequency (50 +/- 0.5) Hz • The grounding resistance of the protective ground wire should be less than 4Ω.

Interior Volume
30L
Temperature Range
-20℃~ + 150℃ (air-cooled)
Temperature resolution
0.01℃
Temperature Fluctuation
±0.5℃
Temperature Uniformity
±2.0℃
Moisture control Range
20%~98%RH
Humidity deviation
±2%RH
Humidity analysis accuracy
0.1%RH
Humidity uniformity
≤±3%RH
Operating environment
+ 5~ + 30℃, relative humidity: ≤ 85%;
Inner box Size
300*400*250mm
Dimension
600 * 1050 * 1200Mm (W * H * D) The actual Size shall prevail
cooling rate
RT~ 0℃/about 25min (no load) about 1 ℃/min
heating rate
RT~ + 150℃/about 40min (no load) about 3 ℃/min
Inner box material
High-quality SUS304 stainless steel, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other hot workability, no heat treatment hardening phenomenon (no magnetic, use temperature -196 ℃~ 800℃).
Outer box material
Cold rolled steel plate
Outer box light source
High luminance lamp
Stratospheric structure design
Techniques to effectively avoid condensation on the top of the box
Window sweat-proof design
Electric heater device to prevent water condensation (40W)
test hole
Can be used for external test power cord and signal (diameter 50mm)
Machine pulley
Move and adjust the placement position of the mining pulley and fix the position with strong bolts (200Kg/wheel)
Insulation material
Rigid polyurethane foam
In-box tray rack
Movable adjustable grid plate frame and two stainless steel strip grid plates (5.0cm per grid)
Box door
Adopt double-channel heat insulation and air tightness to effectively isolate external temperature leakage
Leakage/surge protection
Leakage Circuit Breaker Leakage Protection FUSE. RC Electronic Surge Prevention Protection
Operating Mode
The 0 ° C to -40 ° C model adopts one-stage compression, and the -40 ° C to -70 ° C uses binary cascade refrigeration.
Refrigeration system
Original imported France Taikang fully enclosed low noise rotor compressor or Japan Hitachi high efficiency fully enclosed compressor
refrigerant
R404a/R23 (ozone depletion index is 0, R23 is used for cascade refrigeration systems)
condenser
Air-cooled: finned tube heat exchanger. Water-cooled: shell and tube heat exchanger
evaporator
Finned tube heat exchanger (also serves as a dehumidifier)
Plate heat exchanger
Stainless steel brazed plate heat exchanger (used in cascade refrigeration systems)
Throttle device
Expansion valve + capillary tubing
Maximum current consumption
Current: 14A; Power: 3.0Kw [Voltage Range: no more than +/- 10%]
Protection compressor
Compressor high Voltage protection: Danfoss high Voltage protection switch; compressor overcurrent, overheating protection: Schneider thermal relay
Protective heater
Chint fuse: 2 groups
Protection circuit
Line fuse: 1 group; protection when the phase is broken, the phase is reversed, and the three-phase is unbalanced
Protection instrument
Instrument Protocol Temperature Limit Overtemperature Protection
Protect products under test
Test zone over-temperature protection: independent device, temperature controller, control test zone temperature.
Inner box material
SUS304 stainless steel
Sealing strip
High and low temperature heat and humidity resistant sealant to ensure sealing performance.
Door handle
The box body integrated handle is used to ensure sealing performance.
Over temperature protector
Test area over-temperature protection, real-time display test area temperature, temperature over the upper limit sound and light alarm and cut off the instrument power supply.
Operating environment air pressure
86kPa~106kPa

[Q] I want to test the performance of electronic components under extreme temperature and humidity conditions. I need a test chamber that can simulate complex environments. Do you have any recommendations?

Recommend the programmable temperature and humidity test chamber. It supports complex program editing and can simulate various test conditions such as high and low temperature alternation, constant humidity and heat, making it suitable for the research, development, and inspection of electronic components, materials, and finished products. Its temperature and humidity control is precise, with excellent uniformity, ensuring the reliability of test results.

[Q] Given the limited space in our lab but the need to perform high and low temperature cycle testing on rubber materials, what kind of equipment should we choose?

Consider a compact programmable temperature and humidity test chamber with an inner volume of approximately 30 liters. Its relatively small external dimensions make it suitable for laboratories with limited space. Despite its compact size, it does not compromise on performance, offering a temperature control range from -20°C to +150°C and supporting program cycles, which can meet the high and low temperature cycling test requirements for materials such as rubber.

[Q] When selecting a test chamber, are the controller and communication functions important? We want to remotely monitor and export data.

Important. It is recommended to choose a model equipped with a large-size touchscreen intelligent controller. It supports multi-group program editing and connectivity, making operation intuitive. More importantly, it comes standard with USB and RS232 interfaces, allowing for convenient export of historical data to a USB drive, and supports optional RS485 or LAN network communication. This enables you to remotely design programs, monitor operational status, and collect data on a computer, achieving automated management and significantly improving experimental efficiency.

CATEGORIES

APKJ AP-HX-30B programmable Humidity Chamber high and low temperature alternating environment test

Model

Overview

Features

Principle

Applications

Standards

Steps

Notice

[Q] I want to test the performance of electronic components under extreme temperature and humidity conditions. I need a test chamber that can simulate complex environments. Do you have any recommendations?

[Q] Given the limited space in our lab but the need to perform high and low temperature cycle testing on rubber materials, what kind of equipment should we choose?

[Q] When selecting a test chamber, are the controller and communication functions important? We want to remotely monitor and export data.

Tags:

APKJ AP-HX-30B programmable Humidity Chamber high and low temperature alternating environment test

Model

Overview

Features

Principle

Applications

Standards

Steps

Notice

[Q] I want to test the performance of electronic components under extreme temperature and humidity conditions. I need a test chamber that can simulate complex environments. Do you have any recommendations?

[Q] Given the limited space in our lab but the need to perform high and low temperature cycle testing on rubber materials, what kind of equipment should we choose?

[Q] When selecting a test chamber, are the controller and communication functions important? We want to remotely monitor and export data.

Tags:

Similar products