APKJ AP-HX-30C programmable Humidity Chamber high and low temperature heating and humidity test

Name: APKJ AP-HX-30C programmable Humidity Chamber high and low temperature heating and humidity test
Brand: Apkjgroup
SKU: NB042321
Price: 4280.0 USD
Availability: InStock

$ 4280.00Ex works

With 120 program control capabilities, temperature and humidity uniformity up to +/- 2 ° C and +/- 3% RH, multi-wing air supply circulation is used to avoid test dead ends, and LAN remote monitoring and data export functions are supported.

Model

Get Quote

Category : Temperature Humidity Chamber

Brand : Apkjgroup

SKU : NB042321

Service :The delivery and service By NBCLab.Com

Overview

APKJ AP-HX-30C programmable humidity chamber mainly provides complex high and low temperature alternating test environment and test conditions for the testing of electronic parts, industrial materials, finished product research and development, production and inspection. The equipment adopts 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, supports 120 programs, each group of 100 segments, with program circulation, connection and data recording functions.

Features

1. Adopt 7-inch large touch AP-900 intelligent programmable temperature and humidity controller, support 120 sets of programs, each set of 100 segments 2. Remote control can be achieved by connecting to the computer via the LAN interface 3. Utilize a multi-wing blower for strong air circulation to ensure uniform distribution of temperature and humidity 4. Complete safety protection device, automatically displaying fault status and providing Troubleshooting methods 5. Adopt original imported Compressor (France Taikang or Japan Hitachi) and high-quality parts 6. Studio volume 30L, Temperature range -40~ 150 ℃, Moisture control range 20~ 98% R.H

Principle

The equipment is mainly composed of a combination of control panel, switchboard, thermal insulation compartment, blower, heater, humidifier and freezer. Strong air supply circulation is carried out through multi-wing blower to avoid any dead ends and make the indoor temperature and humidity evenly distributed. The refrigeration system adopts original imported Compressor, with evaporator, condenser and other components to realize temperature control; the heating system adopts nickel-chromium heater; the control system realizes precise temperature and humidity regulation through microcomputer program controller and Sensor.

Applications

Electronics Communication, Chemical, Hardware, Rubber, Toys, Scientific Research

Standards

GB/T10589-2008、GB/T10586-2006、GB/T10592-2008、GB/T2423.1-2008、GB/T2423.2-2008、GB/T2423.3-2006、MIL-STD810D、GB/T2423.4-2008、GJB150.9-1986、GB2423.34-2012

Steps

1. Ensure that the installation site is not affected by strong vibration and strong electromagnetic field, and the ground is flat and ventilated 2. Configure the corresponding capacity air or power switch to provide AC220V power supply 3. Set program parameters through the controller, up to 100 segments per group of programs 4. Start the equipment for testing, which can be monitored remotely through the LAN interface 5. After the test is completed, export the data and turn off the power of the device

Notice

○ Prohibition of testing or storage of flammable, explosive or volatile matter specimens ○ Prohibition of testing or storage of samples of corrosive substances Prohibition of testing or storage of biological samples Prohibition of testing or storage of samples of strong electromagnetic emission sources ○ No strong vibration and strong electromagnetic field are required around the equipment ○ Power supply must meet AC220V +/- 10%, 50 +/- 0.5Hz requirements ○ The grounding resistance of the protective ground wire should be less than 4Ω. ○ The working environment temperature should be kept at 5~ 30 ℃

Interior Volume
30L
Temperature Range
-40~ 150℃ (air-cooled)
Temperature resolution
0.01℃
Temperature Fluctuation
±0.5℃
Temperature Uniformity
±2.0℃
Moisture control Range
20%~98%RH
Humidity deviation
±2%RH
Humidity analysis accuracy
0.1%RH
Humidity uniformity
≤±3%RH
Operating environment
+ 5~ + 30℃, relative humidity: ≤ 85%;
Inner box Size
300*400*250mm
Dimension
600 * 1050 * 1200Mm (W * H * D) The actual Size shall prevail
cooling rate
RT~ 0℃/about 25min (no load) about 1 ℃/min
heating rate
RT~ + 150℃/about 40min (no load) about 3 ℃/min
Inner box material
High-quality SUS304 stainless steel, with good corrosion resistance, heat resistance, low temperature strength and mechanical properties; stamping, bending and other hot workability, no heat treatment hardening phenomenon (no magnetic, use temperature -196 ℃~ 800℃).
Outer box material
Cold rolled steel plate
Outer box light source
High luminance lamp
Stratospheric structure design
Techniques to effectively avoid condensation on the top of the box
Window sweat-proof design
Electric heater device to prevent water condensation (40W)
test hole
Can be used for external test power cord and signal (diameter 50mm)
Machine pulley
Move and adjust the placement position of the mining pulley and fix the position with strong bolts (200Kg/wheel)
Insulation material
Rigid polyurethane foam
In-box tray rack
Movable adjustable grid plate frame and two stainless steel strip grid plates (5.0cm per grid)
Box door
Adopt double-channel heat insulation and air tightness to effectively isolate external temperature leakage
Leakage/surge protection
Leakage Circuit Breaker Leakage Protection FUSE. RC Electronic Surge Prevention Protection
Operating Mode
The 0 ° C to -40 ° C model adopts one-stage compression, and the -40 ° C to -70 ° C uses binary cascade refrigeration.
Refrigeration system
Original imported France Taikang fully enclosed low noise rotor compressor or Japan Hitachi high efficiency fully enclosed compressor
refrigerant
R404a/R23 (ozone depletion index is 0, R23 is used for cascade refrigeration systems)
condenser
Air-cooled: finned tube heat exchanger. Water-cooled: shell and tube heat exchanger
evaporator
Finned tube heat exchanger (also serves as a dehumidifier)
Plate heat exchanger
Stainless steel brazed plate heat exchanger (used in cascade refrigeration systems)
Throttle device
Expansion valve + capillary tubing
Maximum current consumption
Current: 14A; Power: 3.0Kw [Voltage Range: no more than +/- 10%]
Protection compressor
Compressor high Voltage protection: Danfoss high Voltage protection switch; compressor overcurrent, overheating protection: Schneider thermal relay
Protective heater
Chint fuse: 2 groups
Protection circuit
Line fuse: 1 group; protection when the phase is broken, the phase is reversed, and the three-phase is unbalanced
Protection instrument
Instrument Protocol Temperature Limit Overtemperature Protection
Protect products under test
Test zone over-temperature protection: independent device, temperature controller, control test zone temperature.
Inner box material
SUS304 stainless steel
Sealing strip
High and low temperature heat and humidity resistant sealant to ensure sealing performance.
Door handle
The box body integrated handle is used to ensure sealing performance.
Over temperature protector
Test area over-temperature protection, real-time display test area temperature, temperature over the upper limit sound and light alarm and cut off the instrument power supply.
Operating environment air pressure
86kPa~106kPa

[Q] Our lab primarily conducts aging tests on chemical materials. We need equipment that can operate stably over long periods and also connect to a computer for data recording. Are there any suitable options?

For aging tests of chemical materials, it is recommended to use a constant temperature and humidity chamber with a programmable controller. It supports long-term stable operation with minimal fluctuations in temperature and humidity. The key feature is its ability to connect to a computer, enabling the programming of complex temperature and humidity cycles through software, as well as real-time recording and exporting of all test data. This facilitates the analysis of material performance changes under different environmental conditions and ensures compliance with relevant national standards.

CATEGORIES